Question

1)Collect information about electroplating make a list of articles in day to day life where this technique is used


2) make a keleidoscope and make a presentation in the class about how it works

3) make a model of a biogas plant and make a presentation in the class about the process of gas production

Answer 1

Electroplating is a process that uses an electric current to reduce dissolved metal cations so that they form a thin coherent metal coating on an electrode. The term is also used for electrical oxidation of anions on to a solid substrate, as in the formation of silver chloride on silver wire to make silver/silver-chloride electrodes. Electroplating is primarily used to change the surface properties of an object (such as abrasion and wear resistance, corrosion protection, lubricity, aesthetic qualities), but may also be used to build up thickness on undersized parts or to form objects by electroforming.

The process used in electroplating is called electrodeposition. It is analogous to a concentration cell acting in reverse. The part to be plated is the cathode of the circuit. In one technique, the anode is made of the metal to be plated on the part. Both components are immersed in a solution called an electrolytecontaining one or more dissolved metal salts as well as other ions that permit the flow of electricity. A power supplysupplies a direct current to the anode, oxidizing the metal atoms that it comprises and allowing them to dissolve in the solution. At the cathode, the dissolved metal ions in the electrolyte solution are reduced at the interface between the solution and the cathode, such that they "plate out" onto the cathode. The rate at which the anode is dissolved is equal to the rate at which the cathode is plated and thus the ions in the electrolyte bath are continuously replenished by the anode.[1]

Other electroplating processes may use a non-consumable anode such as leador carbon. In these techniques, ions of the metal to be plated must be periodically replenished in the bath as they are drawn out of the solution.[2] The most common form of electroplating is used for creating coins, such as US pennies, which are made of zinccovered in a layer of copper.[3]