Question

1. What system converts solid wastes into liquid by bacterial action?
a. septic system
b. drainage system
c. catch basin system
d. water supply system

2. What is provided for air circulation and to permit sewer gases to escape thru the roof?
a. vent
b. p trap
c. blower
d. floor drain

TLE (drafting)​

Answer 1

Answer:

Aftfgd jok non ha I bjaij

Explanation:

ayfyf

Answer 2

Answer:

1)

Presently, the society is facing a serious challenge for the effective management of the increasing amount of produced municipal solid wastes. The accumulated waste has caused a series of environmental problems such as uncontrolled release of greenhouse gases. Moreover, the increasing amount of wastes has resulted in a shortage of areas available for waste disposal, resulting in a nonsustainable waste management. These problems led to serious public concerns, which in turn resulted in political actions aiming to reduce the amount of wastes reaching the environment. These actions aim to promote sustainable waste management solutions. The main objective of these policies is to promote the recycling of municipal solid waste and the conversion of waste to energy and valuable chemicals. These conversions can be performed using either biological (e.g., anaerobic digestion) or thermochemical processes (e.g., pyrolysis). Research efforts during the last years have been fruitful, and many publications demonstrated the effective conversation of municipal solid waste to energy and chemicals. These processes are discussed in the current review article together with the change of the waste policy that was implemented in the EU during the last years

2) In modern plumbing, a drain-waste-vent (or DWV) is part of a system that allows air to enter a plumbing system to maintain proper air pressure to enable the removal of sewage and greywater from a dwelling. Waste is produced at fixtures such as toilets, sinks, and showers. As the water runs down, proper venting is required to avoid a vacuum from being created. As the water runs down air must be allowed into the waste pipe either through a roof vent, or the "drain waste vent." (or DWV)