English, asked by manasvishwakarma14, 12 hours ago

10 line on hardisk. ​

Answers

Answered by aditiverma1605
0

Answer:

Hard disk, Magnetic storage medium for a microcomputer. Hard disks are flat, circular plates made of aluminum or glass and coated with a magnetic material. Hard disks for personal computers can store up to several gigabytes (billions of bytes) of information. Data are stored on their surfaces in concentric tracks. A small electromagnet, called a magnetic head, writes a binary digit (1 or 0) by magnetizing tiny spots on the spinning disk in different directions and reads digits by detecting the magnetization direction of the spots. A computer’s hard drive is a device consisting of several hard disks, read/write heads, a drive motor to spin the disks, and a small amount of circuitry, all sealed in a metal case to protect the disks from dust. In addition to referring to the disks themselves, the term hard disk is also used to refer to the whole hard drive.

please mark me brainliest

Answered by khazafee
0

Answer:

Hard disk.

  1. It can be defined as a rigid non-removable magnetic disk with a large data storage capacity.
  2. The disk is made up of magnetic material and are sealed inside a case.
  3. It is used to store lots of programs and data permanently.
  4. It can store more information than a floppy disk. For eg- A hard disk can store anywhere from 10 to more than 100 Zettabytes.
  5. The capacity of a hard drive is usually measured in gigabytes (GB), however hard disk capacity can also be measured in terabytes when the capacity is over 1000 gigabytes
  6. A disk is divided into tracks, cylinders and sectors.
  7. Track: A track is that portion of a disk which passes under a single stationary head during a disk rotation, a ring 1 bit wide
  8. Cylinder: A cylinder is comprised of the set of tracks described by all the heads at a single seek position.
  9. Sector: A track is divided into segments of sectors, which is the basic unit of storage.Data is stored in sectors within cylinders and is read by a head which passes over the spinning surface of each disk.
  10. When there is more than one disk, each one is called a platter. There are 1 to 12 platters in a hard disk.
  • HOPE IT HELPS..:))
Similar questions