10 point of water cycle
Answers
Answer:
Step 1: Evaporation
The water cycle starts with evaporation. It is a process where water at the surface turns into water vapors. Water absorbs heat energy from the sun and turns into vapors. Water bodies like the oceans, the seas, the lakes and the river bodies are the main source of evaporation. Through evaporation, water moves from hydrosphere to atmosphere. As water evaporates it reduces the temperature of the bodies.
Step 2: Condensation
As water vaporizes into water vapor, it rises up in the atmosphere. At high altitudes the water vapors changes into very tiny particles of ice /water droplets because the temperature at high altitudes is low. This process is called condensation. These particles come close together and form clouds and fogs in the sky.
Step 3: Sublimation
Apart from evaporation, sublimation also contributes to water vapors in the air. Sublimation is a process where ice directly converts into water vapors without converting into liquid water. This phenomenon accelerates when the temperature is low or pressure is high. The main sources of water from sublimation are the ice sheets of the North Pole and the South Pole and the ice caps on the mountains. Sublimation is a rather slower process than evaporation.
Step 4: Precipitation
The clouds (condensed water vapors) then pour down as precipitation due to wind or temperature change. This occurs because the water droplets combine to make bigger droplets. Also when the air cannot hold any more water, it precipitates. At high altitudes the temperature is low and hence the droplets lose their heat energy. These water droplets fall down as rain. If the temperature is very low (below 0 degrees), the water droplets fall as snow. Water also precipices in the form of drizzle, sleet and hail. Hence water enters lithosphere.
Step 5: Transpiration
As water precipitates, some of it is absorbed by the soil. This water enters into the process of transpiration. Transpiration is a process similar to evaporation where liquid water is turned into water vapor by the plants. The roots of the plants absorb the water and push it toward leaves where it is used for photosynthesis. The extra water is moved out of leaves through stomata (very tiny openings on leaves) as water vapor. Thus water enters the biosphere and exits into gaseous phase.
Step 6: Runoff
As the water pours down (in whatever form), it leads to runoff. Runoff is the process where water runs over the surface of earth. When the snow melts into water it also leads to runoff. As water runs over the ground it displaces the top soil with it and moves the minerals along with the stream. This runoff combines to form channels and then rivers and ends up into lakes, seas and oceans. Here the water enters hydrosphere.
Step 7: Infiltration
Some of the water that precipitates does not runoff into the rivers and is absorbed by the plants or gets evaporated. It moves deep into the soil. This is called infiltration. The water seeps down and increases the level of ground water table. It is called pure water and is drinkable. The infiltration is measured as inches of water-soaked by the soil per hour.
Look below for more information in understanding the phenomenon of the water cycle.
Answer:
Some of the important processes that form part of the water cycle are evaporation, transpiration, condensation, precipitation, infiltration and surface runoff. Together these processes ensure that water is cycled between the land and sky. It is the microscopic structure of water that determines its unique properties.