15. According to Terzaghi, the net
ultimate bearing capacity of Clay is
given by:
Answers
Answer:
The ultimate load which a foundation can support may be calculated using bearing capacity theory. For preliminary design, presumed bearing values can be used to indicate the pressures which would normally result in an adequate factor of safety. Alternatively, there is a range of empirical methods based on in situ test results.
The ultimate bearing capacity (qf) is the value of bearing stress which causes a sudden catastrophic settlement of the foundation (due to shear failure).
The allowable bearing capacity (qa) is the maximum bearing stress that can be applied to the foundation such that it is safe against instability due to shear failure and the maximum tolerable settlement is not exceeded. The allowable bearing capacity is normally calculated from the ultimate bearing capacity using a factor of safety (Fs).
When excavating for a foundation, the stress at founding level is relieved by the removal of the weight of soil. The net bearing pressure (qn) is the increase in stress on the soil.
qn = q - qo
qo = g D
where D is the founding depth and g is the unit weight of the soil removed.
Oxygen and hydrogen combine together by chemical means to form water.As it is a chemical reaction the properties of hydrogen and oxygen is not same as that of water. So we cannot correlate their properties of them by any means