2%of the items of a factor are defective the items are packed in box what is the probability that there will be 2 defective items in a box of 100Use your brain power!
Complete the table below, showing
how substances of daily use are
classified
Substances in daily use
Man-made
Abiotic
Plant origin
Leather
where is the answerSuhana said ",multiplying my number by 5 and adding 8to it gives the same answer as subrating my number from 20",find suhana's numberSuhana said ",multiplying my number by 5 and adding 8to it gives the same answer as subrating my number from 20",find suhana's number Find the value of the polynomial 4.r? - 5x + 3, when x=-1
plz help me guysPriya’s mom is trying to decide between two plumbers to fix her sink. The first plumber charges
₹ 50 for his service call , plus an additional charge ₹36 per hour for labour. The second plumber
charges ₹ 35 for his service call , plus an additional charge ₹39 per hour for labour. At how many congratulations2%of the items of a factor are defective the items are packed in box what is the probability that there will be 2 defective items in a box of 100Use your brain power!
Complete the table below, showing
how substances of daily use are
classified for jaldi jaldi answer do fast
Answers
Answer:
Working safely with hazardous chemicals requires proper use of laboratory equipment. Maintenance and regular inspection of laboratory equipment are essential parts of this activity. Many of the accidents that occur in the laboratory can be attributed to improper use or maintenance of laboratory equipment. This chapter discusses prudent practices for handling equipment used frequently in laboratories.
The most common equipment-related hazards in laboratories come from devices powered by electricity devices for work with compressed gases, and devices for high or low pressures and temperatures. Other physical hazards include electromagnetic radiation from lasers and radio-frequency generating devices. Seemingly ordinary hazards such as floods from water-cooled equipment, accidents with rotating equipment and machines or tools for cutting and drilling, noise extremes, slips, trips, falls, lifting, and poor ergonomics account for the greatest frequency of laboratory accidents and injuries. Understandably, injuries to the hands are very common in the laboratory. Care should be taken to use appropriate gloves when handling laboratory equipment to protect against electrical, thermal, and chemical burns, cuts, and punctures.
7.B. WORKING WITH WATER-COOLED EQUIPMENT
The use of water as a coolant in laboratory condensers and other equipment is common practice. Although tap water is often used for these purposes, this practice should be discouraged. In many localities conserving water is essential and makes tap water inappropriate. In addition, the potential for a flood is greatly increased. Refrigerated recirculators can be expensive, but are preferred for cooling laboratory equipment to conserve water and to minimize the impact of floods. To prevent freezing at the refrigeration coils, using a mixture of water and ethylene glycol as the coolant is prudent. Spills of this mixture are very slippery and must be cleaned thoroughly to prevent slips and falls.
Most flooding occurs when the tubing supplying the water to the condenser disconnects. Hoses can pop off when building water pressure fluctuates, causing irregular flows, or can break when the hose material has deteriorated from long-term or improper use. Floods also result when exit hoses jump out of the sink from a strong flow pulse or sink drains are blocked by an accumulation of extraneous material. Proper use of hose clamps and maintenance of the entire cooling system or alternative use of a portable cooling bath with suction feed can resolve such problems. Plastic locking disconnects can make it easy to unfasten water lines without having to unclamp and reclamp secured lines. Some quick disconnects also incorporate check valves, which do not allow flow into or out of either half of the connection when disconnected. This feature allows for disconnecting and reconnecting with minimal spillage of water. To reduce the possibility of overpressurization of fittings or glassware, consider installing a vented pressure relief device on the water supply. Interlocks are also available that shut off electrical power in the event of loss of coolant flow and are recommended for unattended operations.