Question

2. What are lubricants?​

Answer 1

Answer:

A lubricant is a substance, usually organic, introduced to reduce friction between surfaces in mutual contact, which ultimately reduces the heat generated when the surfaces move. It may also have the function of transmitting forces, transporting foreign particles, or heating or cooling the surfaces.

Explanation:

please mark me as brainelist

Answer 2

$\huge(Answer)$

☞ A lubricant is a substance, usually organic, introduced to reduce friction between surfaces in mutual contact, which ultimately reduces the heat generated when the surfaces move. It may also have the function of transmitting forces, transporting foreign particles, or heating or cooling the surfaces.

Explanation:

➜Definition:-

➝Lubricant is a substance which is used to control (more often to reduce) friction and wear of the surfaces in a contact of the bodies in relative motion [1]. Depending on its nature, lubricants are also used to eliminate heat and wear debris, supply additives into the contact, transmit power, protect, seal. A lubricant can be in liquid (oil, water, etc.), solid (graphite, graphene, molybdenum disulfide), gaseous (air) or even semisolid (grease) forms. The liquid lubricants can be classified based on the base oil to synthetic/semi-synthetic, mineral or environmentally acceptable (biodegradable) oils. Most of the lubricants contain additives (5-30%) to improve their performance

➝The application determines which oil, commonly referred to as the base oil, should be used. In extreme conditions, synthetic oils are typically used. Where the environment is of concern, environmentally acceptable lubricants must be used.

➜Evolution of Lubricants:-

➝The history of lubricants started thousands years ago, as early as in 2400 BC (and possibly earlier) an Egyptian statue to the grave of Tehuti-Hetep, El-Bersheh was transported with the aid of liquid (oil/water) lubricant in order to reduce friction between sledge and ground/sand. By 1400 BC Egyptians used animal fat to lubricate chariot axles. However, the solid theoretical understanding of the lubricant action was only possible with the development of the viscous flow laws discovered by Sir Isaac Newton in 1687. Based on the laws of viscous flow, Professor Osborne Reynolds developed the classical equation of thin film lubrication. This equation is the basis of the classical hydrodynamic lubrication theory and is the most widely used theory of lubrication.

➝Early in the 20th century, only mineral oils, vegetable oils or fats, and greases were mostly considered as lubricants. However lately solid lubricants, synthetic oils, water and gas based lubricants were included into the concept of a lubricant as well. The broadening of the concept has been accompanied by a greater understanding of the lubricant performance, and its limitations.

➜Lubrication Mechanisms:-

All the surfaces in nature are rough, at least microscopically (or even at atomic level). When two rough surfaces slide against each other (or roll) the asperities of the surfaces come close to each other and interlock, adhere and generate friction. The goal of any lubrication approach is to separate the rubbing surfaces by a lubricant layer, which prevents (or at least minimizes) direct contact of the bodies [3] as shown in the figure below. By choosing appropriate lubricant, the friction and wear of the materials can be controlled.

➜Types of Lubricants:-

→Lubricants can be classified by their state into following groups:-

• liquid lubricants: all liquid lubricants, including mineral, natural, synthetic oils, emulsions, etc.
• solid lubricants: all lubricants in solid form, including powders, coatings and composites (graphite, polytetrafluorethylene, Molybdenum disulfide, etc.)
• gaseous lubricants: typically its air, but can be any other gas.
• semisolid lubricants: greases, generally consists of a soap emulsified with mineral or vegetable oil.

✧Lubricants can also be classified by their main function:-

• Anti-wear additives (AW): reduces wear by the growth of protective layer on the surfaces (zinc dialkyldithiophosphate).
• Extreme pressure additives (EP): protects the components from seizure by the formation of the coating on the surfaces (graphite, molybdenum disulfide).
• Friction modifiers: used to control friction, typically made of solid particles (graphite, molybdenum disulfide, tungsten disulfide, etc.).
• Corrosion inhibitors: protects the surfaces from the attack of chemically active substances, such as oxygen, by creating a corrosion resistant layer.
• Viscosity Index Improvers: used to prevent or minimize a decrease of the viscosity index of lubricants at higher temperatures.