Question

4. During charging, by induction, it is-​

Answer 1

Answer:

Induction charging is a method used to charge an object without actually touching the object to any other charged object. An understanding of charging by induction requires an understanding of the nature of a conductor and an understanding of the polarization process.

Answer 2

Answer:

Induction charging is a method used to charge an object without actually touching the object to any other charged object. An understanding of charging by induction requires an understanding of the nature of a conductor and an understanding of the polarization process.

Explanation:

◉LET'S EXPLORE MORE

✯What is Induction?

Induction is the magnetic field which is proportional to the rate of change of the magnetic field. This definition of induction holds for a conductor. Induction is also known as inductance. L is used to represent the inductance and Henry is the SI unit of inductance.

1 Henry is defined as the amount of inductance required to produce an emf of 1 volt in a conductor when the current change in the conductor is at the rate of 1 Ampere per second.

✯Factors Affecting Inductance

Following are the factors that affect the inductance:

• The number of turns of the wire used in the inductor.
• The material used in the core.
• The shape of the core.

Electromagnetic Induction law was given by Faraday which states that by varying the magnetic flux electromotive force is induced in the circuit. From Faraday’s law of electromagnetic induction, the concept of induction is derived. Inductance can be defined as the electromotive force generated to oppose the change in current at a particular time duration.

According to Faraday’s Law:

Electromotive force =

$– L  \frac{Δi}{Δt} </p><p>$

Unit of Inductance =

$\frac{volt \: second}{ampere} = henry$

✯Types of Inductance

Two types of inductance are there:

• Self Induction
• Mutual Induction

☆What is Self Induction?

When there is a change in the current or magnetic flux of the coil, an opposed induced electromotive force is produced. This phenomenon is termed as Self Induction. When the current starts flowing through the coil at any instant, it is found that, that the magnetic flux becomes directly proportional to the current passing through the circuit. The relation is given as:

$ϕ= I \\ </p><p></p><p>ϕ = L I$

Where L is termed as self-inductance of the coil or the coefficient of self-inductance. The self-inductance depends on the cross-sectional area, the permeability of the material, or the number of turns in the coil.

The rate of change of magnetic flux in the coil is given as,

$</p><p>e = –  \frac{dϕ}{dt}  = –  \frac{d(LI)}{dt} \\ or \: e = L \frac{di}{dt} </p><p></p><p>$

✧Self Inductance Formula

$</p><p></p><p>L=N \frac{ϕ}{I} </p><p></p><p></p><p>$

Where,

• L is the self inductance in Henries
• N is the number of turns
• Φ is the magnetic flux
• I is the current in amperes

☆What is Mutual Induction?

We take two coils, and they are placed close to each other. The two coils are P- coil (Primary coil) and S- coil (Secondary coil). To the P-coil, a battery, and a key is connected wherein the S-coil a galvanometer is connected across it. When there is a change in the current or magnetic flux linked with two coils an opposing electromotive force is produced across each coil, and this phenomenon is termed as Mutual Induction. The relation is given as:

$</p><p></p><p>ϕ = I \\ </p><p></p><p>ϕ = M I</p><p></p><p>$

Where M is termed as the mutual inductance of the two coils or the coefficient of the mutual inductance of the two coils.

The rate of change of magnetic flux in the coil is given as,

$</p><p></p><p>e = –  \frac{dϕ}{dt}  = –  \frac{d(MI)}{dt} </p><p></p><p>$

✧Mutual Inductance Formula

$</p><p></p><p>M= \frac{μ _{0} μ {r} N _{1}N _{2}A}{l} </p><p></p><p></p><p></p><p></p><p>$

Where,

• μ0 is the permeability of free space
• μr is the relative permeability of the soft iron core
• N is the number of turns in coil
• A is the cross-sectional area in m2
• l is the length of the coil in m