5. A series RLC circuit has a quality factor of 5 at 50 radians/sec. The current
flowing through the circuit at resonance is 10A and the supply voltage is 100v.
The total impedance of the circuit is 200. Find the circuit constants R, L, C.
6. Define two port networks. And list any six parameters of it with its dependent
and independent variables.
Answers
Power delivered to an RLC series AC circuit is dissipated by the resistance alone. The inductor and capacitor have energy input and output but do not dissipate it out of the circuit. Rather they transfer energy back and forth to one another, with the resistor dissipating exactly what the voltage source puts into the circuit. This assumes no significant electromagnetic radiation from the inductor and capacitor, such as radio waves. Such radiation can happen and may even be desired, as we will see in the next chapter on electromagnetic radiation, but it can also be suppressed as is the case in this chapter. The circuit is analogous to the wheel of a car driven over a corrugated road as shown in Figure 4. The regularly spaced bumps in the road are analogous to the voltage source, driving the wheel up and down. The shock absorber is analogous to the resistance damping and limiting the amplitude of the oscillation. Energy within the system goes back and forth between kinetic (analogous to maximum current, and energy stored in an inductor) and potential energy stored in the car spring (analogous to no current, and energy stored in the electric field of a capacitor). The amplitude of the wheels’ motion is a maximum if the bumps in the road are hit at the resonant frequency.
Figure 4. The forced but damped motion of the wheel on the car spring is analogous to an RLC series AC circuit. The shock absorber damps the motion and dissipates energy, analogous to the resistance in an RLC circuit. The mass and spring determine the resonant frequency.
A pure LC circuit with negligible resistance oscillates at f0, the same resonant frequency as an RLC circuit. It can serve as a frequency standard or clock circuit—for example, in a digital wristwatch. With a very small resistance, only a very small energy input is necessary to maintain the oscillations. The circuit is analogous to a car with no shock absorbers. Once it starts oscillating, it continues at its natural frequency for some time. Figure 5 shows the analogy between an LC circuit and a mass on a spring.
The figure describes four stages of an L C oscillation circuit compared to a mass oscillating on a spring. Part a of the figure shows a mass attached to a horizontal spring. The spring is attached to a fixed support on the left. The mass is at rest as shown by velocity v equals zero. The energy of the spring is shown as potential energy. This is compared with a circuit containing a capacitor C and inductor L connected together. The energy is shown as stored in the electric field E of the capacitor between the plates. One plate is shown to have a negative polarity and other plate is shown to have a positive polarity. Part b of the figure shows a mass attached to a horizontal spring which is attached to a fixed support on the left. The mass is shown to move horizontal toward the fixed support with velocity v. The energy here is stored as the kinetic energy of the spring. This is compared with a circuit containing a capacitor C and inductor L connected together. A current is shown in the circuit and energy is stored as magnetic field B in the inductor. Part c of the figure shows a mass attached to a horizontal spring which is attached to a fixed support on the left. The spring is shown as not stretched and the energy is shown as potential energy of the spring. The mass is show to have displaced toward left. This is compared with a circuit containing a capacitor C and inductor L connected together. The energy is shown as stored in the electric field E of the capacitor between the plates. One plate is shown to have a negative polarity and other plate is shown to have a positive polarity. But the polarities are reverse of the first case in part a. Part d of the figure shows a mass attached to a horizontal spring which is attached to a fixed support on the left. The mass is shown to move toward right with velocity v. the energy of the spring is kinetic energy. This is compared with a circuit containing a capacitor C and inductor L connected together. A current is shown in the circuit opposite to that in part b and energy is stored as magnetic field B in the inductor.