5. Why rate of reaction is fastest, if distilled water is not added to 50 mL (i.e D flask) 0.1 M
Na2, S2, O3?
Answers
Answer:
odic Table
Named Reactions
Chemistry Laws
Chemistry Important Questions
Type your search
ChemistryChemistry ArticlesEffect Of Temperature On The Rate Of Reaction Between Sodium Thiosulphate And Hydrochloric Acid
Top Banner
Effect of temperature on the rate of reaction between sodium thiosulphate and hydrochloric acid
In this article, we have discussed the effect of temperature on rate of reaction between hydrochloric acid and sodium thiosulphate.
Aim:
The aim of this experiment – Understanding the effect of temperature variation on the rate of reaction between hydrochloric acid and sodium thiosulphate.
Theory:
The rate of chemical reaction is directly proportional to the temperature. As the temperature increases, the reaction rate also increases. With the increase in temperature the kinetic energy of the molecules also increases. Usually, it is observed that for every 10-degree increase in temperature the rate of reaction is doubled. Therefore, the rate of reaction of hydrochloric acid and sodium thiosulphate also increases with rise in temperature.
Materials required:
The apparatus and materials required for this experiment are as follows:
Conical flask of volume 250 mL
Stop-watch
Tripod stand
Measuring cylinder
Stopwatch
Burner
Thermometer
Wire gauze
0.1M sodium thiosulphate solution
Concentrated nitric acid
Distilled water
1M hydrochloric acid
Procedure:
The effect of temperature on the rate of reaction:
Take a conical flask of volume 100 mL.
Add 50 mL of 0.1M sodium thiosulphate solution to it.
With the help of a thermometer measure, the temperature of solution added to the flask.
Take 1M HCl of volume 10 mL with the help of a burette and add it to the conical flask containing sodium thiosulphate.
Start the stopwatch as soon as you have poured half of hydrochloric acid in the flask containing sodium thiosulphate solution.
Take a white tile and draw a cross mark on it.
Shake the conical flask and place it on the tile.
Observe the flask and start the stop-watch as soon as the cross mark becomes invisible.
Empty the flask and wash it with concentrated nitric acid first and later with distilled water.
Take the washed flask add 50 mL of 0.1M sodium thiosulphate solution and heat it to (T+ 10)°.
Continue the steps from point 4.
Repeat the experiment for (T+ 20)°, (T+ 30)°, (T+ 40)° and record the results.
Record the time taken for the process.
Observation and result
Trials
Temperature (T)
Time (t)
1/t
1 T
2 (T+ 10)°
3 (T+ 120)°
4 (T+ 30)°
5 (T+ 40)°
Precautions to be taken during the experiment:
Thoroughly wash the apparatus with concentrated nitric acid and distilled water.
Take the exact quantity of solutions needed for this experiment.
Complete the experiment in one go to avoid temperature variations.
Use same tile for all the observations.
Stay alert while you start and stop the stop-watch.
Viva Voce:
1. What is the concentration of sodium thiosulphate used for this experiment?
Ans: 0.1M.
2. What is the concentration of hydrochloric acid used for this experiment?
Ans: 1M.
3. When to start the stop-watch?
Ans: As soon as you pour half of HCl in the flask containing sodium thiosulphate solution.
4. Name the two solutions used in this experiment.
Ans: Hydrochloric acid and sodium thiosulphate.
5. What is the importance of concentrated nitric acid?
Ans: It is used in thorough washing of the apparatus used in the experiment. After washing the apparatus with HNO3 rinse it with distilled water.
Explanation:
IT may help you
Pls like
Follow
