Question

7. Building Management System*
Ask Lab Supervisor for hardware relating to this Project.
A high security building management system has day/night switch operating states.
The system automatically looks after security, lighting and heating and has the
following inputs and outputs:
INPUTS: 0
2:
3:
4:
Day (ON)/Night (OFF)
Thermostat (high temp = OFF)
Lift Disabled Alarm (ON = lift fault)
Mains Power failure (OFF)
Presence Detector (ON = person detected)
System Reset (resets all alarms)
OUTPUTS:
0:
1:
2:
3:
4:
Local Alarm
External Security Company Alarm
Heating
Main Lighting
Low level & emergency lighting
The control algorithm is as follows:
TI
1111 binisalve on during mower failure or at night write algorithm​

Answer 1

Answer:

fcbbcucjcujffghfghjhfghnklloifuikhyu Lou and to uy