Question

A block with a size of 20 mm x 20 mm x 125 mm, is pressed with two pieces flat dies so that the size is 5 mm x 80 mm x 125 mm. If the flow voltage
uniaxial (σ0) = 10 MPa and the coefficient of friction µ = 0.25. Determine the pressure distribution on a surface area of 80 mm (at 5 mm intervals) and calculate the power necessary for the forming process.​

Answer 1

Answer:

uniaxial (σ0) = 10 MPa and the coefficient of friction µ = 0.25. Determine the pressure distribution on a surface area of 80 mm (at 5 mm intervals) and calculate the power necessary for the forming process.