A compressor is driven by 1200 rpm motor by means of 250 x 10 mm
Design a pair of spur gear to transmit a power of 15kW from a shaft
running at 900rpm to a parallel shaft to be run at 300 rpm maintaining a
distance of 160mm between the shaft centers. Suggest the module and
check for safe. Consider pressure angle 20° FDI, Cs=1.5, pinion made of
cast steel treated with allowable stress 197 MPa, gear made of cast iron
with allowable stress of 56 MPa, pinion as 20 teeth.
Answers
Answer:
Step-A compressor is driven by 1200 rpm motor by means of 250 x 10 mm
Design a pair of spur gear to transmit a power of 15kW from a shaft
running at 900rpm to a parallel shaft to be run at 300 rpm maintaining a
distance of 160mm between the shaft centers. Suggest the module and
check for safe. Consider pressure angle 20° FDI, Cs=1.5, pinion made of
cast steel treated with allowable stress 197 MPa, gear made of cast iron
with allowable stress of 56 MPa, pinion as 20 tee
A compressor is driven by 1200 rpm motor by means of 250 x 10 mm
Design a pair of spur gear to transmit a power of 15kW from a shaft
running at 900rpm to a parallel shaft to be run at 300 rpm maintaining a
distance of 160mm between the shaft centers. Suggest the module and
check for safe. Consider pressure angle 20° FDI, Cs=1.5, pinion made of
cast steel treated with allowable stress 197 MPa, gear made of cast iron
with allowable stress of 56 MPa, pinion as 20 teeth.A compressor is driven by 1200 rpm motor by means of 250 x 10 mm
Design a pair of spur gear to transmit a power of 15kW from a shaft
running at 900rpm to a parallel shaft to be run at 300 rpm maintaining a
distance of 160mm between the shaft centers. Suggest the module and
check for safe. Consider pressure angle 20° FDI, Cs=1.5, pinion made of
cast steel treated with allowable stress 197 MPa, gear made of cast iron
with allowable stress of 56 MPa, pinion as 20 teeth.A compressor is driven by 1200 rpm motor by means of 250 x 10 mm
Design a pair of spur gear to transmit a power of 15kW from a shaft
running at 900rpm to a parallel shaft to be run at 300 rpm maintaining a
distance of 160mm between the shaft centers. Suggest the module and
check for safe. Consider pressure angle 20° FDI, Cs=1.5, pinion made of
cast steel treated with allowable stress 197 MPa, gear made of cast iron
with allowable stress of 56 MPa, pinion as 20 teeth.A compressor is driven by 1200 rpm motor by means of 250 x 10 mm
Design a pair of spur gear to transmit a power of 15kW from a shaft
running at 900rpm to a parallel shaft to be run at 300 rpm maintaining a
distance of 160mm between the shaft centers. Suggest the module and
check for safe. Consider pressure angle 20° FDI, Cs=1.5, pinion made of
cast steel treated with allowable stress 197 MPa, gear made of cast iron
with allowable stress of 56 MPa, pinion as 20 teeth.
Answer:
qwerrtuolhdaxvn
Step-by-step explanation:
2235690532235