ALL MODERATOR!
TAKE ANSWER OK
BEST SE BHI BEST ANSWER OK
1!ELECTRIC BELL WORKING PLESE
EXPERT TAKE ANSWER AND BEST ANSWER AND SUMPLE LANGUAGE TO UNDERSTAND
RULE & NO SPAM NO CHEAT OK
Answers
2. The electro magnet attracts the soft iron armature.
3. The hammer attached to the armature hits the gong.
4. When the armature gets attracted to the electro magnet, it is no longer in touch with screw.
5. Due to the broken circuit, the current will not flow and the armature will come back to its initial position.
6. Again, the circuit gets complete and the current will flow, electro magnet becomes active and the whole process is repeated which causes a ringing sound.
• Hope it helps, please mark it as brainliest.
An electric bell consists of an iron core, on which is wound a wire as a coil. One end of the coil is connected to one terminal of a battery, and the other end to a steel rod that acts like a spring for the hammer touching the screw contact. The other terminal of the battery is connected to the screw contact with a switch in the middle. Working of an electric bell Electric current flows through the coil when the switch is ON, and the iron core acts as an electromagnet. The iron core attracts the hammer towards it. The hammer hits the bell and produces a sound. The circuit breaks at the screw contact when the hammer moves towards the iron core. At this point, the iron core ceases to be an electromagnet. The hammer is pulled back to its original position due to the spring action of the steel rod, and then touches the contact again to complete the circuit. The circuit is completed and current flows through the coil again, and the hammer strikes the bell again. The process repeats itself and you hear a ringing sound since the hammer keeps hitting the bell, until the switch is released.
