& Explain the methods of irrigation
le sprinkler Modern method
is Drip system -
lilly Traditional method
Answers
Answer: HEY MATE
Explanation:
Drip irrigation is a type of micro-irrigation system that has the potential to save water and nutrients by allowing water to drip slowly to the roots of plants, either from above the soil surface or buried below the surface. The goal is to place water directly into the root zone and minimize evaporation.
Sprinkler Irrigation is a method of applying irrigation water which is similar to rainfall. Water is distributed through a system of pipes usually by pumping. It is then sprayed into the air and irrigated entire soil surface through spray heads so that it breaks up into small water drops which fall to the ground
Drip irrigation is sometimes called trickle irrigation and involves dripping water onto the soil at very low rates (2-20 litres/hour) from a system of small diameter plastic pipes fitted with outlets called emitters or drippers. Water is applied close to plants so that only part of the soil in which the roots grow is wetted, unlike surface and sprinkler irrigation, which involves wetting the whole soil profile. With drip irrigation water, applications are more frequent (usually every 1-3 days) than with other methods and this provides a very favourable high moisture level in the soil in which plants can flourish.
HOPE IT HELPS!
PLEASE MARK IT AS BRAINLIEST! PLEASE!!
Answer:
Traditional Irrigation Methods
These irrigation systems were used in earlier years. However, even today some small farms in rural areas adopt these. Although they are cheaper than modern methods, they are not as efficient. Because they need human or animal labour to function. Some of these systems are,
1. Moat
Also called the pulley system, it involves pulling up water from a well or other such source to irrigate the land. This is a time consuming and labour intensive process, but it is very cost-efficient. Also, using a moat avoids wastage of water.
2. Chain pump
A chain pump consists of two large wheels connected by a chain. There are buckets attached to the chain. Further, one part of the chain dips into the water source. As the wheel turns, the bucket picks up water. The chain later lifts them to the upper wheel where the water gets deposited into a source. The empty bucket gets carried back down.
3. Dhekli
It is a process of drawing water from a well or such similar source. Here we tie a rope and bucket to a pole. At the other end, we tie a heavy stick or any other object as a counterbalance. And we use this pole to draw up water.
4. Rahat
Rahat uses animal labour. Above the well, we tie a large wheel. An ox or cow would turn the wheel to draw the water from the well.
Introduction to Soil Preparation and Sowing of Seeds
Modern Irrigation Methods
These are more efficient irrigation systems that were invented in recent decades. These help us use water economically without wastage for agriculture. Let us take a look at the two most important systems, the drip irrigation and the sprinkler.
1. Drip Irrigation System
Drip Irrigation
Drip irrigation is the most used irrigation system these days. In the drip irrigation, we lay plastic pipes in rows near the crops or plants. These pipes have holes in them. The water seeps from these holes drop by drop, hence the name drip irrigation. Drip irrigation is one of the most efficient irrigation methods as it reduces water wastage in agriculture.
2. Sprinkler System
Sprinkler Irrigation
Sprinkler systems mimic the phenomenon of rain. In sprinkler systems, the pipes carry water to central locations on the farm. The sprinklers placed there, distribute the water across the fields. The sprinkler method is one of the most efficient irrigation methods to irrigate the uneven land for agriculture. In addition, sprinkler systems provide the best coverage regardless of the size of the farm.