Question

answer the following

3.What is done to prevent corrosion of metal.?​

Answer 1

Explanation:

Corrosion can be prevented by removing one of these conditions. Coating a metal surface with paint or enamel provides a barrier between the metal and the moisture in the environment. The process of coating a metal surface with another metal that is more likely to be oxidized is referred to as sacrificial coating.

Answer 2

Answer:

We can prevent corrosion by selecting the following things:

metal type

protective coating

environmental measures

sacrificial coatings

design modification

Metal Type :

One simple way to prevent corrosion is to use corrosion-resistant metal such as aluminum or stainless steel. Depending on the applications, these metals can be used to reduce the need for additional corrosion protection.

Protective Coatings:

The application of a paint coating is a cost-effective way of preventing corrosion. Paint coatings act as a barrier between the metal and atmospheric moisture to avoid its contact. For example black paint.

Another possibility is applying a powder coating. In this process, a dry powder is applied to the clean metal surface to avoid its contact with the surrounding oxygen. For example acrylic, polyester, epoxy, nylon, and urethane

Environmental Measures :

Corrosion is caused by a chemical reaction between the metal and gases in the surrounding environment. By taking measures to control the environment, these unwanted reactions can be minimized. For example, this would be decreased by treating the water in water boilers with softeners to adjust hardness, alkalinity, or oxygen content.

Sacrificial Coatings :

Sacrificial coating involves coating the metal with an additional metal type that is more likely to oxidize.

There are two main techniques for sacrificial coating:

Cathodic Protection: The most common example of cathodic protection is the coating of iron alloy steel with zinc, this process is known as galvanizing. Zinc is a more active metal than steel and when it starts to corrode it oxides which inhibits the corrosion of the steel. This method is known as cathodic protection.

Anodic Protection: Anodic protection involves coating the iron alloy steel with a less active metal, such as tin. The tin will not corrode, so the steel will be protected as long as the tin coating is in place. This method is known as anodic protection.

Design Modification :

Design modifications can help reduce corrosion and improve the durability of any existing protective anti-corrosive coatings. Ideally, designs should avoid trapping dust and water, encourage the movement of air, and avoid open crevices. Ensuring the metal is accessible for regular maintenance will also increase longevity.

Mark it brainliest please