CROP PRODUCTION
1. Why traditional methods of irrigation are cheaper, but less efficient?
Answers
Answer:
These are the methods of irrigation that were used in the earlier years. Even today some small farms in rural areas adopt these. Although they are cheaper than the modern methods, they are not nearly as efficient. They require human or animal labour to function. Some of these methods are,
1. Moat
Also called the pulley system, it involves pulling up water from a well or other such source to irrigate the land. It is an extremely time consuming and labour intensive system, but it is very cost efficient. Also, wastage of water is avoided when using a moat system of irrigation.
2. Chain pump
A chain pump consists of two large wheels connected by a chain. There are buckets attached to the chain. One part of the chain dips into the water source. As the wheel turns, the bucket picks up water. The chain later lifts them to the upper wheel where the water gets deposited into a source. And the empty bucket gets carried back down.
3. Dhekli
It is a system of drawing water from a well or such similar source. Here we tie a rope and bucket to a pole. At the other end, we tie a heavy stick or any other object as a counterbalance. And we use this pole to draw up water.
4. Rahat
So Rahat system of irrigation uses animal labour. Above the well, we tie a large wheel. An ox or cow would turn the wheel to draw the water from the well.
Answer:
The modern methods of irrigation are better than traditional methods because it saves more water and also reduces the time and labour. This is why people prefer modern methods on traditional methods of irrigation.
May be it's helpful for you