Define gauge of a railway track .State different gauges in India.
Answers
Answer:
Explanation:
What is Rail Gauge?
The gauge of the railway track is a clear minimum vertical distance between the inner sides of two tracks is called railway gauge. That is, the distance between the two tracks on any railway route is known as railway gauge. Approximately sixty percent of the world's railway uses standard gauge of 1,435 mm. There are 4 types of railway gauge used in India. Broad gauge, Metre gauge, Narrow gauge and Standard gauge (for Delhi Metro).
Broad Gauge
Broad gauge is also called wide gauge or large line. The distance between the two tracks in these railway gauges is 1676 mm (5 ft 6 in). It would not be wrong to say that any gauge, wider than standard gauge or 1,435 mm (4 ft 8½ inches), is called broad gauge. The first railway line built in India was a broad gauge line from Bore Bunder (now Chhatrapati Shivaji Terminus) to Thane in 1853. Broad gauge railway is also used on ports for crane etc. This gives better stability and they are even better than thinner gauges.
Standard Gauge
The distance between the two tracks in this railway gauge is 1435 mm (4 ft 8½ in). In India, standard gauge is used only for urban rail transit systems like Metro, Monorail and Tram. Till 2010, the only standard gauge line in India was the Kolkata (Calcutta) tram system. All metro lines coming in urban areas will be made only in the standard gauge, because it is easy to get rolling stock for the standard gauge as compared to the Indian gauge. By 2016, the lines that are in operation are Delhi Metro, Rapid Metro Rail Gurgaon, Bangalore Metro and Mumbai Metro. All these are operated separately from Indian Railways.
Metre Gauge
The distance between the two tracks is 1,000 mm (3 ft 3 3/8 in). The metre gauge lines were made to reduce the cost. All meter gauge lines except the Nilgiri Mountain Railway which is a legacy run on a meter gauge in India will be converted into broad gauge under project Unigauge.
Narrow Gauge
The small gauge is called as Narrow gauge or a small line. The narrow gauge railway is the railway track, in which distance between two tracks is 2 ft 6 in (762 mm) and 2 ft (610 mm). In 2015, there was a 1,500 km narrow gauge rail route, which is considered to be about 2% of the total Indian rail network. As the country is developing, small line services are expected to be completed by 2018. Now the small lines are being converted into big lines. Trains with small bogies now will no longer be able to see much. The Darjeeling Mountain Railway has declared UNESCO World Heritage on 24 July, 2008. Kalka Shimla Railway is also very popular...
Factors affecting the Railway Gauge
- Traffic conditions: If the traffic intensity is likely to be high on the track, then the broad gauge will be appropriate instead of the standard gauge.
- Poor areas development: Narrow gauges have been installed in some parts of the world to develop a poor area and thus helpful in linking the poor area with the outside world.
- Cost of track: The cost of the railway track is directly proportional to the width of its gauge. If available funds are not enough to make standard gauge and there is no railway line in the area, then the metre gauge or narrow gauge is preferred.
- Speed of the train:
The speed of a train is a function of the diameter of the wheel, which in turn is limited by the gauge.
The wheel's diameter is usually 0.75 times the width of the gauge and thus, the speed of the train is almost proportional to the gauge.
If higher speeds are to be achieved then the broad gauge track is given the priority instead of metre gauge or narrow gauge track.
So, now you may have understood about Broad Gauge, Narrow Gauge, Metre Gauge and Standard Gauge.