Question

Define irrigation. Also write modern and traditional ways of irrigation. ​

Answer 1

Answer:

the process of watering the plants in regular intervals of time is called irrigation

MODERN METHODS Of IRRIGATION

sprinkler system

This system is more useful on the uneven land were sufficient water is not available . the perpendicular pipes , having rotating nozzles on top are joined to the main pipeline at regular intervals . When water is allowed to flow through the main pipe under pressure with the help of a pump it escapes from rotating nozzles .

drip system

in this system the water falls drop by drop directly near the roots so it is called drip system . drip system is also called tickle system

Answer 2

Explanation:

Irrigation means the watering of land to make it ready for agriculture. It is the process of application of water to crops through artificial channels to grow them.

Water is vital for the growth of plants. And, there can be no plants or crops if they do not have access to water in some form. It is, thus, crucial to supply water to crops and plants in time as per their need. The supply of water to plants comes from various water resources. For example,

wells

ponds

lakes

canals

dams and reservoirs

Importance of Irrigation

Irrigation is necessary for agriculture and farming.

Firstly, it enables growth and photosynthesis in Plants. Plants absorb minerals and nutrients from the soil via their roots. These minerals dissolve in the water present in the soil. Then the water transports these nutrients to all parts of the plant. In this way, it enables growth and photosynthesis.

Secondly, it provides the moisture that is crucial during the germination phase of the plant’s life cycle

Thirdly, it helps increase soil fertility by adding moisture to it. It also makes the land easier to plough.

Lastly, it increases the yield from the farm.

What are the Advantages & Disadvantages of Manure and Fertilizers?

Traditional Irrigation Methods

These irrigation systems were used in earlier years. However, even today some small farms in rural areas adopt these. Although they are cheaper than modern methods, they are not as efficient. Because they need human or animal labour to function. Some of these systems are,

1. Moat

Also called the pulley system, it involves pulling up water from a well or other such source to irrigate the land. This is a time consuming and labour intensive process, but it is very cost-efficient. Also, using a moat avoids wastage of water.

2. Chain pump

A chain pump consists of two large wheels connected by a chain. There are buckets attached to the chain. Further, one part of the chain dips into the water source. As the wheel turns, the bucket picks up water. The chain later lifts them to the upper wheel where the water gets deposited into a source. The empty bucket gets carried back down.

3. Dhekli

It is a process of drawing water from a well or such similar source. Here we tie a rope and bucket to a pole. At the other end, we tie a heavy stick or any other object as a counterbalance. And we use this pole to draw up water.

4. Rahat

Rahat uses animal labour. Above the well, we tie a large wheel. An ox or cow would turn the wheel to draw the water from the well.