Question

define the term electroplating, ductility and malleability​

Answer 1

Answer:

Malleability: Metals can be beaten into sheets and this property of metals is called malleability.

Ductility: Metals can be drawn into wires and this property is called ductility.

Electroplating: The process of coating the surface of a conducting material with a metal. During the process, the surface to be covered acts as a cathode in an electrolytic cell, and the metal that is to cover it acts as an anode.

Answer 2

Answer:

Electroplating: Electroplating is the process of applying a metal coating on another piece of metal (or another conductive surface) through an electro-deposition process. In electroplating, the deposited metal becomes part of the existing product with the plating/coating.

Ductility: Ductility is when a solid material stretches under tensile strain. If ductile, a material may be stretched into a wire. Malleability, a similar property, is a material's ability to deform under pressure (compressive stress). If malleable, a material may be flattened by hammering or rolling.

Malleability: Malleability is a physical property of metals that defines their ability to be hammered, pressed, or rolled into thin sheets without breaking. In other words, it is the property of a metal to deform under compression and take on a new shape.

Explanation:

Hope this helps you .