Physics, asked by venkat123789, 2 months ago

Describe an experiment to show that Resistance depends on Area of crossection.​

Answers

Answered by rashimishra76
0

Explanation:

Use thicker nichrome in place of nichrome wire and note down the reading. Replace the nichrome wire with copper wire which have same length with same cross section area and take down the reading. ... So conductivity of resistance depends on length, Cross sectional area and material nature.

Answered by Yoursenorita
54

EXPERIMENT:-

  • AIM:-To study the factors on which resistance of conducting wires depends. Apparatus Required : A cell, an ammeter, nichrome wires of different length but same area of cross-section (thickness), nichrome wires of same length but different thickness, copper and iron wire of the same length and same thickness as that of any nichrome wire.

  • PROCEDURE:-

  1. Connect the cell, an ammeter and plug key in series with nichrome wire of length T (marked 1) in the gap XY as shown.
  2. Close the key and note the reading of ammeter. It measures the current ‘I’1 through the nichrome wire (marked ‘1’).
  3. Replace the marked 1 wire with another nichrome wire having same area of cross-section (thickness) but of double length’2l’ (marked 2).
  4. Note the ammeter reading (I2) again after closing the key.
  5. Again replace the marked 2 wire with marked 3 wire which has the same length but is thicker than marked 1 and 2 nichrome wires. Again note down the current (I3) through this wire.
  6. Unplug the key. Remove marked 3 nichrome wire from the gap XY. Connect the copper wire marked 4 having same length and same area of cross-section as that of nichrome wire marked 1.
  7. Plug the key again and note the ammeter reading. It measures the current (I4) through copper wire.
  8. Repeat the experiment with iron wire and measure the current (I5).

  • OBSERVATIONS:-
  1. Current ‘ I’ is half ofI1 i.e., I2 =1/2 I1
  2. Current ‘ I’ is half ofI1 i.e., I2 =1/2 I1Current I3 increases when thicker wire of same length and of same material i. e., nichrome is used.
  3. Current I4 and I5 is different for copper and iron wire.

  • CONCLUSIONS:-
  1. Different wires drew different amount of current from the same cell.
  2. Different wires drew different amount of current from the same cell.First observation indicates that the resistance of the conductor increases with increase in length. So, resistance is directly proportional to length.
  3. Different wires drew different amount of current from the same cell.First observation indicates that the resistance of the conductor increases with increase in length. So, resistance is directly proportional to length.Second observation shows that thicker wires have lesser resistance. So, resistance is inversely proportional to area of cross section of the wire.
  4. Different wires drew different amount of current from the same cell.First observation indicates that the resistance of the conductor increases with increase in length. So, resistance is directly proportional to length.Second observation shows that thicker wires have lesser resistance. So, resistance is inversely proportional to area of cross section of the wire.Third observation shows that resistance of the conductor depends on the nature of its material.

Similar questions