Describe how crystals of copper sulphate are prepared
Answers
Answered by
3
Take a clean beaker (250 ml) and put the powdered sample of copper sulphate in it. Add distilled water and stir well using glass rod.
2. Make the solution more clearly by adding 2 – 3 drops of concentrated sulphuric acid in it and heat up 70° C then add more impure copper sulphate until no more of it dissolves.
3. Filter the solution and collect the filtrate in a china dish heat it over wire gauze kept on tripod with proper stirring to get constant temperature till it becomes half of the taken, cool the other end of glass rod by blowing air.
4. Formation of thin crust indicates that crystallization points is reached, then turn off the burner and cover it with a watch glass without disturbing it. As the solution cools down, crystals separate out. Slow cooling ensures for better crystallization.
5. Decant the mother liquor and wash the crystals with a thin stream of cold water with the help of a wash bottle press these between filter paper sheets. Then blue colored copper sulphate crystals will be formed.
2. Make the solution more clearly by adding 2 – 3 drops of concentrated sulphuric acid in it and heat up 70° C then add more impure copper sulphate until no more of it dissolves.
3. Filter the solution and collect the filtrate in a china dish heat it over wire gauze kept on tripod with proper stirring to get constant temperature till it becomes half of the taken, cool the other end of glass rod by blowing air.
4. Formation of thin crust indicates that crystallization points is reached, then turn off the burner and cover it with a watch glass without disturbing it. As the solution cools down, crystals separate out. Slow cooling ensures for better crystallization.
5. Decant the mother liquor and wash the crystals with a thin stream of cold water with the help of a wash bottle press these between filter paper sheets. Then blue colored copper sulphate crystals will be formed.
Anonymous:
your answer should be marked as a brain list answer
no prblm sometimes it happens.. we have to copy
U deserve it
not me
sorry for that
sorry
it doesnot matter to me i m happy becoz atleat i have tried
no need to speak sorry
oh that's good
:):)
Answered by
0
Answer:
Copper sulphate crystal is prepared by crystallisation method. Take a cup of water in a
breaker and a few drops of dil. Sulphuric acid. Heat the solution. When it starts boiling, add
copper sulphate powder. Slowly continue to add copper sulphate powder till no more
powder can be dissolved. During this process, continuously stir the solution. Filter the
solution. Leave it for cooling, after some time, the crystals of copper sulphate can be seen.
Explanation:
Similar questions