describe the steps involved in getting clarified water from wastewater
Answers
The steps involved in getting clarified water from wastewater are as follows:
1. Wastewater is passed through bar screens to remove large objects like rags, sticks, cans, plastic, packets, and napkins.
2. Water then goes to a grit and sand removal tank where sand grit and pebbles settle down.
3. The water is placed in a large tank where solid impurities, like faeces, settle down and are removed with a scraper which is called sludge. Floatable solids like oils and grease are removed with a skimmer.
Water, thus form after passing from the above process is called clarified water.
Explanation:
Treatment of wastewater involves physical, chemical, and biological processes, which remove physical, chemical and biological matter that contaminates the wastewater.
Following steps are involved:
Wastewater is passed through bar screens which remove large objects like rags, sticks, cans, plastic packets, napkins etc.
Water then goes through Grit and Sand removal tank, where sand, grit and pebbles settle down.
Water is then allowed to settle in a tank where solids like faeces (called sludge) settle at the bottom and are removed with a scraper. A skimmer removes the floatable solids like oil and grease. Water so cleared is called clarified water. Sludge is used to produce biogas.
Clarified water is then passed through an aerator tank where air is pumped into the water. It helps aerobic bacteria to grow which decompose organic matter like human waste.
After several hours, the suspended microbes settle at the bottom of the tank as activated sludge. The water is then removed from the top. The dried activated sludge is used as manure.
Water is removed from the top and is stored in a tank. The treated water has low level of organic material and suspended matter. It is discharged into a sea, a river or into the ground. Sometimes it is disinfected through chemicals like Chlorine and ozone and then distributed to towns.