describe the working mechanism of air pump with diagram
Answers
Answer:
The inlet and the outlet are used to direct the flow of air, while the piston is used to generate the flow of air. When the piston is pulled up, air gets sucked into the pump through the inlet. ... When the piston is forced down, the air becomes compressed and closes the inlet. Then the air flows out from the outlet.
Answer:
Pumps and compressors use very similar mechanisms, and basically perform the same action, but in different fluid regimes. At some point there is a crossover point in terminology, but here are some stereotypes:
• Compressors operate on compressible fluids, typically gases. Pumps operate on fluids, typically liquids, approximated as in-compressible.
• Compressors are intended to develop a very high pressure rise against a closed system; pumps are designed to develop relatively little pressure against a free-flowing system with minimal back-pressure.
• Pumps are often used in continuous-flow operation, while many lower-end compressors must have intermittent duty cycles.
• Compressors usually have a feedback sensor to shut off when they reach a desired pressure; pumps have a fixed design and operate freely across their performance curve as conditions change
Explanation:
the daigram is not proper
