Design a Cotter joint to withstand a load of 30KN on the basis of the following data
Material=steel a=SOMPa --SOMPa (630MPa
Find out only:1) diameter of each rod.
(11) diameter of the spigot.
Answers
Answered by
0
ypes of Cotter Joints
Following are the three commonly used cotter joints to connect two rods by a cotter :
1. Socket and spigot cotter joint, 2. Sleeve and cotter joint, and 3. Gib and cotter joint.
The design of these types of joints are discussed, in detail, in the following pages.
Similar questions