Question

Directions Winte TRUE the methods, procedure, or technique in making fashion accessones is correct and FALSE if it is not
1. in wining fashion accessory, you must secure one end of the wire in a pair of round-nose pliers, and carefully bend the wire to create a loop.
2. It is required to cut a length of wire approximately 2 inches longer in length when performing wiring for the beads to be
threaded
3. When securing one end of the wire you need a pair of round-nosed pliers, and carefully cut the wire to create a loop
4. To knot between beads, you need to allow approximately twice as much thread as the length of your finished necklace
5. A needle is required performing knots in between beads so that all your spacing is even
6. To make a hook, you need to cut a 1 millimeter of wire
7. Use the flat-nosed pliers to bend an excess wire at 100 degrees
8. To coil a hook and loop fastening, use a round-nosed pliers, bend the wire over to forming a loop
9. Attaching a Fastener is an appropriate way of finishing a necklace, knots are used to attach fasteners
10. Double Knotting of the beads is used if you have bigger or larger holes.​

Answer 1

Answer:

Directions Winte TRUE the methods, procedure, or technique in making fashion accessones is correct and FALSE if it is not

1. in wining fashion accessory, you must secure one end of the wire in a pair of round-nose pliers, and carefully bend the wire to create a loop.

2. It is required to cut a length of wire approximately 2 inches longer in length when performing wiring for the beads to be

threaded

3. When securing one end of the wire you need a pair of round-nosed pliers, and carefully cut the wire to create a loop

4. To knot between beads, you need to allow approximately twice as much thread as the length of your finished necklace

5. A needle is required performing knots in between beads so that all your spacing is even

6. To make a hook, you need to cut a 1 millimeter of wire

7. Use the flat-nosed pliers to bend an excess wire at 100 degrees

8. To coil a hook and loop fastening, use a round-nosed pliers, bend the wire over to forming a loop

9. Attaching a Fastener is an appropriate way of finishing a necklace, knots are used to attach fasteners

10. Double Knotting of the beads is used if you have bigger or larger holes.