Question

Draw a neat sketch of a cycle of magnetisation and explain the following terms: (i) Magnetic saturation (ii) Retentivity (iii) Hysteresis loss

Answer 1

Answer:

We know that the magnetic flux generated by an electromagnetic coil is the amount of magnetic field or lines of force produced within a given area and that it is more commonly called “Flux Density”. Given the symbol B with the unit of flux density being the Tesla, T.

ADVERTISING

We also know from the previous tutorials that the magnetic strength of an electromagnet depends upon the number of turns of the coil, the current flowing through the coil or the type of core material being used, and if we increase either the current or the number of turns we can increase the magnetic field strength, symbol H.

Previously, the relative permeability, symbol μr was defined as the ratio of the absolute permeability μ and the permeability of free space μo (a vacuum) and this was given as a constant. However, the relationship between the flux density, B and the magnetic field strength, H can be defined by the fact that the relative permeability, μr is not a constant but a function of the magnetic field intensity thereby giving magnetic flux density as:  B = μ H.

Then the magnetic flux density in the material will be increased by a larger factor as a result of its relative permeability for the material compared to the magnetic flux density in vacuum, μoH and for an air-cored coil this relationship is given as:



So for ferromagnetic materials the ratio of flux density to field strength ( B/H ) is not constant but varies with flux density. However, for air cored coils or any non-magnetic medium core such as woods or plastics, this ratio can be considered as a constant and this constant is known as μo, the permeability of free space, ( μo = 4.π.10-7 H/m ).

By plotting values of flux density, ( B ) against the field strength, ( H ) we can produce a set of curves called Magnetisation Curves, Magnetic Hysteresis Curves or more commonly B-H Curves for each type of core material used as shown below.

Explanation:

please MARK me as a BRAINLIST