Question

Effect of contact angle in metallic surface roghness

Answer 1

The effects of major process parameters (such as synthesis temperature, microwave heating rate, volume ratio (i.e., the volume of the initial synthesis solution over the total volume of the reactor ...... A robust microfluidic device for the synthesis and crystal growth of organometallic polymers with highly organized structures.

Answer 2

hi.


1583 Total downloads

Cited by 1 articles

Turn on MathJax

Share this article

Article information

Abstract

Contact angles play an important role in the mass and heat transfer. Stainless steel 304 has been used for nuclear power plan structure material until now. An experiment to measure contact angle of demineralized aqua and nanofluid containing nano particle of zirconia on metal surface of stainless steel 304 with sessile drop method was conducted. The measurement to measure the static contact angle and drop of nano fluid containing nano particle zirconia on stainless steel with different surface roughness was carried out. It was observed that stainless steel 304 was good hydrophylic properties with decreasing surface roughness of stainless steel during drop of aqua demineralized and nano fluid respectively. As a result the contact angle of demineralized aqua is decreased from 97.39 to 78.42 and contact angle of nano fluid from 94.3 to 67.50, respectively with decreasing surface roughness of stainless stee 304. Wettability of nanofluid on surface stainless steel 304 is better than aqua demineralized.


hope helps uh