----------engine fuel is burned outside
Answers
Answer:
An internal combustion engine (ICE) is a heat engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is applied typically to pistons, turbine blades, rotor or a nozzle. This force moves the component over a distance, transforming chemical energy into useful work. This replaced the external combustion engine for applications where weight or size of the engine is important.

Diagram of a cylinder as found in 4-stroke gasoline engines.:
C – crankshaft
E – exhaust camshaft
I – inlet camshaft
P – piston
R – connecting rod
S – spark plug
V – valves. red: exhaust, blue: intake.
W – cooling water jacket
gray structure – engine block

Diagram describing the ideal combustion cycle by Carnot
The first commercially successful internal combustion engine was created by Étienne Lenoir around 1860[1] and the first modern internal combustion engine was created in 1876 by Nicolaus Otto (see Otto engine).
The term internal combustion engine usually refers to an engine in which combustion is intermittent, such as the more familiar four-stroke and two-stroke piston engines, along with variants, such as the six-stroke piston engine and the Wankel rotary engine. A second class of internal combustion engines use continuous combustion: gas turbines, jet engines and most rocket engines, each of which are internal combustion engines on the same principle as previously described.[1][2] Firearms are also a form of internal combustion engine,[2] though of a type so specialized that they are commonly treated as a separate category.
In contrast, in external combustion engines, such as steam or Stirling engines, energy is delivered to a working fluid not consisting of, mixed with, or contaminated by combustion products. Working fluids for external combustion engines include air, hot water, pressurized water or even liquid sodium, heated in a boiler.
ICEs are usually powered by energy-dense fuels such as gasoline or diesel fuel, liquids derived from fossil fuels. While there are many stationary applications, most ICEs are used in mobile applications and are the dominant power supply for vehicles such as cars, aircraft and boats.
ICEs are typically powered by fossil fuels like natural gas or petroleum products such as gasoline, diesel fuel or fuel oil. Renewable fuels like biodiesel are used in compression ignition(CI) engines and bioethanol or ETBE (ethyl tert-butyl ether) produced from bioethanol in spark ignition(SI) engines. Renewable fuels are commonly blended with fossil fuels. Hydrogen, which is rarely used, can be obtained from either fossil fuels or renewable energy.
I hope this will help you
Answer:
HEAT is the answer of your question
Explanation:
May it help you...