Question

Explain malleability ductility by electron sea model

Answer 1

Definition of our question

.. the property of metal by which it can be changed or shaped into thin sheets is called melleability.

Ductility......all metals are good conductor of electricity.the property by which metal can be formed into thin wire is called ductility....

hope it helps you.....

Answer 2

Explanation:

Malleability and Ductility

PrintPrint

Malleability and ductility are related. A malleable material is one in which a thin sheet can be easily formed by hammering or rolling. In other words, the material has the ability to deform under compressive stress.

Malleability: Metal hammered into thin sheets, shows hammer hitting gold to make thin circle

A malleable material is one in which a thin sheet can be easily formed by hammering. Gold is the most malleable metal.

Credit: Buzzle

In contrast, ductility is the ability of a solid material to deform under tensile stress. Practically, a ductile material is a material that can easily be stretched into a wire when pulled as shown in the figure below. Recall pulling is applying tensile stress.

Ductility text showing the starting point, ductility, (how far it can stretch) and the end point, very tapered in the middle.

Ductility test.

Credit: Civil Engineering(link is external)

If we pull on a rod of material, some of the possible profiles of the rods at fracture are shown in the figure below.

Breaking profiles: A) Snap w/ jagged edges. B) some contour and pulling then snap, C)pull all the way into smooth contours and points

Fracture Samples

Credit: Sigmund (Own work) [CC BY-SA 3.0], via Wikimedia Commons

Profile (a) is an example of the material that fractures with no plastic deformation, i.e., it is a brittle material. Profile (b) is an example of a material that fractures after very little plastic deformation. These two profiles would be classified as having low ductility. Profile (c) in contrast is a material that plastically deforms before fracture. This material has high ductility. The stress-strain curves for the brittle, profile