Question

explain roasting ,froth floation and magnetic separation?​

Answer 1

Answer:

$\bf ⭐Answer⭐$

Explanation:

✰Roasting:-

✯︎Roasting is a process of heating of sulphide ore to a high temperature in presence of air. It is a step of the processing of certain ores. More specifically, roasting is a metallurgical process involving gas–solid reactions at elevated temperatures with the goal of purifying the metal component. Often before roasting, the ore has already been partially purified, e.g. by froth flotation. The concentrate is mixed with other materials to facilitate the process. The technology is useful but is also a serious source of air pollution.

✯︎The topography of the Moon has been measured by the methods of laser altimetry and stereo image analysis, including data obtained during the Clementine mission. The most visible topographic feature is the giant far side South Pole-Aitken basin, which possesses the lowest elevations of the Moon. The highest elevations are found just to the north-east of this basin, and it has been suggested that this area might represent thick ejecta deposits that were emplaced during an oblique South Pole-Aitken basin impact event. Other large impact basins, such as the maria Imbrium, Serenitatis, Crisium, Smythii, and Orientale, also possess regionally low elevations and elevated rims.

✰Froth flotation:-

✯︎Froth flotation is a process for selectively separating hydrophobic materials from hydrophilic. This is used in mineral processing, paper recycling and waste-water treatment industries. Historically this was first used in the mining industry, where it was one of the great enabling technologies of the 20th century. It has been described as "the single most important operation used for the recovery and upgrading of sulfide ores". The development of froth flotation has improved the recovery of valuable minerals, such as copper- and lead-bearing minerals. Along with mechanized mining, it has allowed the economic recovery of valuable metals from much lower grade ore than previously.

✰Magnetic separation:-

✯︎Magnetic separation is the process of separating components of mixtures by using magnets to attract magnetic materials. The process that is used for magnetic separation detaches non-magnetic material with those that are magnetic. This technique is useful for not all, but few minerals such as ferromagnetic (materials strongly affected by magnetic fields) and paramagnetic (materials that are less affected but the effect is A large diversity of mechanical means are used to separate magnetic materials. During magnetic separation, magnets are situated inside two separator drums which bear liquids. Due to the magnets, magnetic particles are being drifted by the movement of the drums. This can create a magnetic concentrate.

Eg:- an ore concentrate.

HOPE IT HELPS YOU FRIEND...☺

Answer 2

Answer:

here is your answer buddy

Explanation:

Roasting: roasting is the process of heating of sulphide ore at a high temperature in presence of air.

Froth floation: froth floation is a process of selectively seperating hydrophobic materials from hydrophilic. This is used in mineral processing, paper recycling etc....

Magnetic seperation: Magnetic seperation is a process of seperating components of mixtures by using magnets to attract magnetic materials

hope you like this answer buddy please thank and mark this as brainliest answer and thank you buddy have a great and good day. Bye buddy