Question

Explain the steps taken to turn a desktop computer.[5 points]

Answer 1

Explanation:

Step 1: Find the ‘on’ button. It probably looks like this (but might be square or oblong!):

Step 2: Push the button.

On some computers, the button lights up when the computer is on. On laptops, there’s often a light on the front that comes on. You may have to keep pushing for a couple of seconds to make this happen, but don’t worry – you’ll soon get to know how your computer works.

If nothing happens, there are a few things you can check easily:

If you’re using a laptop, the battery might be flat. So plug in the charger, plug the charger into the mains and let the laptop recharge. You can continue to use it while it’s doing this.

If you have a PC, make sure that the plug or any of the other wires haven’t become disconnected.

Ensure that the monitor is turned on. Most PC monitors have an ‘on/off’ button on the bottom corner of the screen (see below). The button often lights up green when the monitor is on.

Monitor on/off button

Step 3: Now you need to log in.

If you’re the only user of your computer, once it’s turned on it may go straight to the desktop:

Desktop

If you’re using a public computer – for example, in a library – you’ll be given instructions (and help if you ask for it) on how to log in.

If you’re sharing your computer with other people, each one will usually have their own account. When you turn on the computer, the screen will look something like this:

Log on accounts

When you click the icon above your name, you’ll be asked for a password. The main user or administrator should set this up for you before you begin. Type in your password and click the arrow.

Computer account

Done!

If you have a PC, it’s a good idea to buy a ‘surge protector’. This prevents your computer being damaged if there’s a sudden problem with your electricity supply. You can buy surge protectors that let you plug all your separate pieces of equipment into them, in addition to your computer. Then when you turn your computer on or off, this automatically turns them on or off, too.