Question

Explain two transistor analogy of SCR. Write relation between anode current and Gate current.
​

Answer 1

Explanation:

Basic operating principle of SCR, can easily be understood by the two transistor model of SCR, as it is a combination of p and n layers.

silicon control rectifier

This is a pnpn thyristor. If we bisect it through the dotted line then we will get two transistors i.e. one pnp transistor with J1 and J2 junctions and another is with J2 and J3 junctions as shown in figure below.

two transistor model of scr

The relation between the collector current and emitter current is shown below

two transistor model of thyristor or scr

Here, IC is collector current, IE is emitter current, ICBO is forward leakage current, α is common base forward current gain and relationship between IC and IB is

Where, IB is base current and β is common emitter forward current gain.

Let’s for transistor T1 this relation holds

And that for transistor T2

Now, by the analysis of two transistors model we can get anode current,

From equation (i) and (ii), we get,

If applied gate current is Ig then cathode current will be the summation of anode current and gate current i.e.

By substituting this valyue of Ik in (iii) we get,

From this relation we can assure that with increasing the value of towards unity, corresponding anode current will increase. Now the question is how increasing? Here is the explanation using two transistor model of SCR.

At the first stage when we apply a gate current Ig, it acts as base current of T2 transistor i.e. IB2 = Ig and emitter current of the T2 transistor IE2 = Ik. Hence establishment of the emitter current gives rise α2 as

Presence of base current will generate collector current as

This IC2 is nothing but base current IB1 of transistor T1, which will cause the flow of collector current,