EXPLAIN WORKING OF VERNIER CALIPERS....?
Answers
Answer:
The vernier scale works on the principle of using alignment of line segments displaced by a small amount to make fine measurements. Human eye can easily detect this alignment of lines which is the main fact that drives a vernier.
.
.
Explanation:
A vernier scale (Vernier Caliper) is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation; thereby increasing resolution and reducing measurement uncertainty by using Vernier acuity to reduce human estimation error.
The vernier is a subsidiary scale replacing a single measured-value pointer, and has for instance ten divisions equal in distance to nine divisions on the main scale. The interpolated reading is obtained by observing which of the vernier scale graduations is co-incident with a graduation on the main scale, which is easier to perceive than visual estimation between two points. Such an arrangement can go to higher resolution by using higher scale ratios, known as the vernier constant. A vernier may be used on circular or straight scales where a simple linear mechanism is adequate. Examples are calipers and micrometers to measure to fine tolerances, on sextants for navigation, on theodolites in surveying, and generally on scientific instruments. The Vernier principle of interpolation is also used for electronic displacement sensors such as absolute encoders to measure linear or rotational movement, as part of an electronic measuring system