Health monitoring of structure using modal analysis
Answers
Answer:Earthquake Recording Instrumentation for Buildings
FEBRUARY 23, 2016
Makati_at_sunsetThe science of structural response to earthquakes is about to get a massive data resource boost due to a mandate introduced in the Philippines for seismic instrumentation in buildings.
In 1992, the National Structural Code of the Philippines (NSCP) first introduced the requirement for seismic monitoring of structures for engineering design purposes. In 2010, the NSCP stated that buildings above 50 metres should have three seismic monitoring points installed, but at this time the requirement was not mandatory.
In recent years PHIVOLCS (the national earthquake authority) have warned that an earthquake of up to magnitude 7.2 is overdue for the West Valley Fault, which would be potentially devastating for Manila and surrounding populated areas. In 2015, the Department of Public Works and Highways (DPWH) issued a directive to all building officials that the seismic monitoring requirement would no longer have exemptions, and released a document titled “Guidelines and Implementing Rules on Earthquake Recording Instrumentation for Buildings”. The requirements for Earthquake Recording Instrumentation (ERI) apply to existing buildings located in Seismic Zone 4 (the entire Philippines except for Palawan and Tawi-Tawi which located in Zone 2). Only once this requirement is satisfied will a renewed Certificate of Occupancy be issued. New building permits will only be issued if plans to show a provision for a Seismic Instrumentation Room (SIR).
Gecko SMA-HRThe engineers at ESS Earth Sciences in conjunction with the seismologists at the Seismology Research Centre have ensured that the new Kelunji Gecko SMA-HR strong motion accelerograph meets the requirements specified in the DPWH guidelines. Taking less than an hour to setup, the Gecko SMA-HR records ground and building vibrations continuously, with over a year of data stored in the memory buffer, ensuring no earthquake is ever missed. With its simple LCD and keypad interface, the Gecko can be set up without a computer without the need for highly trained technical staff.
DALCO (Drilling Advisory & Logistics Corp.) have been the local representatives in the Philippines for ESS seismic equipment for over 10 years and have worked hard to establish an installation and support team to assist building owners in Manila with their requirement to fulfil the DPWH directive.
The flyer below shows how the Kelunji Gecko SMA-HR addresses each compliance point in the DPWH guidelines. For information about installation, pricing and support in the Philippines, please get in touch with DALCO using the contact details on the flyer.
Explanation: