Question

Hello viewers!!!

State four differences between thermoplastics
and thermosetting plastics

Note :-

➸ Don't copy the answer

➸ Spam = Report

➸Only who knows those only answer.

➸If possible brainy stars and moderators plz help.


Thank you!! ​

Answer 1

Answer:

The primary difference between the two is that Thermoset is a material that strengthens when heated, but cannot be remolded or heated after the initial forming, while thermoplastics can be reheated, remolded, and cooled as necessary without causing any chemical changes.

Answer 2

${\large{\pmb{\sf{\underline{RequirEd \: Solution...}}}}}$

Difference between thermoplastic and thermo setting plastic is given below(For app users):

$\begin{gathered}\begin{gathered}\begin{gathered}\begin{gathered}\begin{gathered}\boxed{\begin{array}{c|c}\sf \pink{Thermoplastics} &\sf \purple{Thermosetting \: plastics} \\\frac{\qquad \qquad \qquad \qquad}{}&\frac{\qquad \qquad \qquad \qquad}{} \\ \\ \sf Such \: plastic \: which \: gets \: deformed \: easily \: on & \sf Such \: plastic \: which \: gets \: moulded \: once \\ \sf heating \: are \: known \: as \: thermoplastic & \sf are \: known \: as \: thermosetting \: plastic \\\frac{\qquad \qquad \qquad \qquad}{}&\frac{\qquad \qquad \qquad \qquad}{} \\ \\ \sf Such \: plastic \: which \: gets \: bend \: easily & \sf Such \: plastic \: which \: cannot \: bend \\ \sf are \: known \: as \: thermoplastic & \sf are \: known \: as \: thermosetting \: plastic \\\frac{\qquad \qquad \qquad \qquad}{}&\frac{\qquad \qquad \qquad \qquad}{} \\ \\ \sf These \: have \: low \: melting \: point & \sf These \: have \: high \: melting \: point \\\frac{\qquad \qquad \qquad \qquad}{}&\frac{\qquad \qquad \qquad \qquad}{} \\ \\ \sf Examples \: are \: polythene \: and \: PVC & \sf Examples \: are \: Melamine \: and \: Bekelite \end{array}}\end{gathered}\end{gathered}\end{gathered}\end{gathered}\end{gathered}$

Difference between thermoplastic and thermo setting plastic is given below(For web users):

• Thermoplastic:

★ Such plastic which gets deformed easily on heating are known as thermoplastic.

★ Such plastic which gets bend easily are known as thermoplastic

★ These have low melting point.

★ Example are PVC and polythene.

• Thermo-setting plastic:

★ Such plastic which gets moulded once are known as thermosetting plastic.

★ Such plastic which cannot bend are known as thermosetting plastic

★ These have high melting point.

★ Examples are Melamine and Bakelite.

• Sorry that due to some errors, LaTeX is not coming correct on web. I am heartily sorry for that. But I write in that way, can web users also see this answer properly. Thanks for understanding!