Question

Here are the stages in the explosion of coal but they are in the wrong order.
Write down the letter of each stage in its correct position.
A The coal dust reacts with oxygen in the air.
B Coal dust spreads out through the air.
C The air expands rapidly due to the heat of the reaction with oxygen.
D The coal dust becomes very
hot.
E The air pushes on everything around it with great force.
F Coal dust in the air increases in temperature.
G A piece of coal is ground to dust.​

Answer 1

Answer:

Explanation:

An ignition of methane and air can generate enough air flow to raise mixtures of combustible coal and rock dust. The expanding high temperature combustion products ignite the suspended dust mixture and will continue to propagate following the available combustible fuel supply. If the concentration of the dispersed rock dust is sufficient, the flame will stop propagating. Large-scale explosion tests were conducted within the National Institute for Occupational Safety and Health (NIOSH) Lake Lynn Experimental Mine (LLEM) to measure the dynamic pressure history and the post-explosion dust scour depth. The aim of this effort is to provide quantitative data on depth of dust removal during the early stages of explosion development and its relationship to the depth of floor dust collected for assessing the incombustible content most likely to participate in the combustion process. This experimental work on dust removal on is not only important for coal mine safety but also for industrial dust explosions.

Answer 2

An Ignition of met generate enough air flow to raise mixtures of combustible coal and rock dust. The expanding high temperature combustion products ignite the suspended dust mixture and will continue to propagate following the available combustible fuel supply. If the concentration of the dispersed rock dust is sufficient, the flame will stop propagating. Large-scale explosion tests were conducted within the National Institute for Occupational Safety and Health (NIOSH) Lake Lynn Experimental Mine (LLEM) to measure the dynamic pressure history and the post-explosion dust scour depth. The aim of this effort is to provide quantitative data on depth of dust removal during the early stages of explosion development and its relationship to the depth of floor dust collected for assessing the incombustible content most likely to participate in the combustion process. This experimental work on dust removal on is not only important for coal mine safety but also for industrial dust explosions.

ne and air can