how can we determine the direction of a river in topographical maps?
Answers
Answered by
1
A topographic map, simply put, is a two-dimensional representation of a portion of the three-dimensional surface of the earth. Topography is the shape of the land surface, and topographic maps exist to represent the land surface. Topographic maps are tools used in geologic studies because they show the configuration of the earth’s surface. Cartographers solve the problem of representing the three-dimensional land surface on a flat piece of paper by using contour lines, thus horizontal distances and vertical elevations can both be measured from a topographic map.
General Information
The terms below indicate what information is contained on a topographic map, and where it can be found.
Map Scale: Maps come in a variety of scales, covering areas ranging from the entire earth to a city block (or less).
Vertical Scale (contour interval): All maps have a horizontal scale. Topographic maps also have a vertical scale to allow the determination of a point in three dimensional space.
Contour Lines: Contour lines are used to determine elevations and are lines on a map that are produced from connecting points of equal elevation (elevation refers to height in feet, or meters, above sea level).
The following are general characteristics of contour lines:
1. Contour lines do not cross each other, divide or split.
2. Closely spaced contour lines represent steep slopes, conversely, contour lines that are spaced far apart represent gentle slopes.
3. Contour lines trend up valleys and form a "V" or a "U" where they cross a stream.
On most topographic maps, index contour lines are generally darker and are marked with their elevations. Lighter contour lines do not have elevations, but can be determined by counting up or down from the nearest index contour line and multiplying by the contour interval. The contour interval is stated on every topographic map and is usually located below the scale.
Creating topographic profiles: Remember that topographic maps represent a view of the landscape as seen from above. For producing a detailed study of a landform it is necessary to construct a topographic profile or cross-section through a particular interval. A topographic profile is a cross-sectional view along a line drawn through a portion of a topographic map.
A profile may be constructed quickly and accurately across any straight line on a map by following this procedure:
a. Lay a strip of paper along a line across the area where the profile is to be constructed.
b. Mark on the paper the exact place where each contour, stream and hill top crosses the profile line.
c. Label each mark with the elevation of the contour it represents.
d. Prepare a vertical scale on profile paper by labeling the horizontal lines corresponding to the elevation of each index contour line.
e. Place the paper with the labeled contour lines at the bottom of the profile paper and project each contour to the horizontal line of the same elevation.
f. Connect the points.
Stream Gradient: Stream gradient can also be determined from a topographic map. The gradient of a steam or river is determined by measuring a section of a stream or river and dividing the distance (in miles) into the vertical difference (in feet) between the two points. The result is expressed in feet per mile (ft./mi.). The equation used is:
Gradient =
drop in elevation between two chosen points (feet)
distance between the two points (miles)
Tips for Interpreting Topographic Maps
Vertical exaggeration: Vertical exaggeration is the effect that is created when the horizontal and vertical scales on your topographic profile are not the same.
Determining hillslope: Among other things, a topographic map can be used to measure the average slope of a hill (or hills).
General Information
The terms below indicate what information is contained on a topographic map, and where it can be found.
Map Scale: Maps come in a variety of scales, covering areas ranging from the entire earth to a city block (or less).
Vertical Scale (contour interval): All maps have a horizontal scale. Topographic maps also have a vertical scale to allow the determination of a point in three dimensional space.
Contour Lines: Contour lines are used to determine elevations and are lines on a map that are produced from connecting points of equal elevation (elevation refers to height in feet, or meters, above sea level).
The following are general characteristics of contour lines:
1. Contour lines do not cross each other, divide or split.
2. Closely spaced contour lines represent steep slopes, conversely, contour lines that are spaced far apart represent gentle slopes.
3. Contour lines trend up valleys and form a "V" or a "U" where they cross a stream.
On most topographic maps, index contour lines are generally darker and are marked with their elevations. Lighter contour lines do not have elevations, but can be determined by counting up or down from the nearest index contour line and multiplying by the contour interval. The contour interval is stated on every topographic map and is usually located below the scale.
Creating topographic profiles: Remember that topographic maps represent a view of the landscape as seen from above. For producing a detailed study of a landform it is necessary to construct a topographic profile or cross-section through a particular interval. A topographic profile is a cross-sectional view along a line drawn through a portion of a topographic map.
A profile may be constructed quickly and accurately across any straight line on a map by following this procedure:
a. Lay a strip of paper along a line across the area where the profile is to be constructed.
b. Mark on the paper the exact place where each contour, stream and hill top crosses the profile line.
c. Label each mark with the elevation of the contour it represents.
d. Prepare a vertical scale on profile paper by labeling the horizontal lines corresponding to the elevation of each index contour line.
e. Place the paper with the labeled contour lines at the bottom of the profile paper and project each contour to the horizontal line of the same elevation.
f. Connect the points.
Stream Gradient: Stream gradient can also be determined from a topographic map. The gradient of a steam or river is determined by measuring a section of a stream or river and dividing the distance (in miles) into the vertical difference (in feet) between the two points. The result is expressed in feet per mile (ft./mi.). The equation used is:
Gradient =
drop in elevation between two chosen points (feet)
distance between the two points (miles)
Tips for Interpreting Topographic Maps
Vertical exaggeration: Vertical exaggeration is the effect that is created when the horizontal and vertical scales on your topographic profile are not the same.
Determining hillslope: Among other things, a topographic map can be used to measure the average slope of a hill (or hills).
Similar questions