How can you measure the diameter of a metallic Bob by vernier caliper
don't give internet answer
if you will give correct answer then I will mark as brainliest
Answers
Answer:
Refer to the explanation.
Explanation:
Keep the jaws of the vernier calliper closed. Make sure that the zero of the main scale perfectly coincides with the zero of the vernier scale. If it doesn’t coincide account for the zero error for all observations.
Using a magnifying glass, look for the division of the main scale that coincides with the division of the vernier scale. Note down the number of division that coincides with each other. To avoid parallax error, position your eye directly over the division mark.
Release the movable jaw by gently loosening the screw. Slide it enough to hold the sphere or the cylindrical body between the jaws AB without any undue pressure. Align the perfectly perpendicular to the diameter of the body. Gently tighten the screw in order to clamp the instrument in this position to the body.
Note down the position of the zero of vernier’s scale against the zero of the main scale. Normally, it will not perfectly coincide with any of the divisions on the main scale. Record the main scale division to the left of the zero marks of the vernier scale.
Look for the exact coincidence of the vernier scale division with that of the main scale division in the vernier window from the left end to the right. Note down the number N.
Multiply the obtained N by the least count of the instrument and add the product to the main scale reading noted in step 4. Make sure to convert the product into proper units for valid addition.
Repeat steps 3-6 to get the positions of the body at different positions on its curved surface. Make sure to take three sets of reading in each case.
Record the observations in a tabular column with proper reading. If needed, apply zero correction.
Find the arithmetic mean of the corrected readings of the diameter of the body.
(GOT THIS ANSWER FROM MY OLD BOOK)
PLEASE MARK ME AS THE BRAINIEST
Explanation:
Aim
Use of Vernier’s Calliper to measure the diameter of a small spherical/cylindrical body.
Apparatus/ Materials Required
A spherical body such as a pendulum bob or a glass marble
Vernier’s Caliper
Magnifying Glass
Theory
The smallest distance that can be measured along the distance is the least count. It is the difference between one main scale division and one vernier scale division.
n(V.S.D)=(n−1)M.S.D
Formula Used
Least count of Vernier’s Calliper
=magnitudeofthesmallestdivisononthemainscaletotalnumberofsmalldivisonsonthevernierscale
Corrected Diameter = Mean Observed Diameter – Zero Error
Diagram
To Measure Diameter of a Small Spherical diagram
Procedure
Keep the jaws of the vernier calliper closed. Make sure that the zero of the main scale perfectly coincides with the zero of the vernier scale. If it doesn’t coincide account for the zero error for all observations.
Using a magnifying glass, look for the division of the main scale that coincides with the division of the vernier scale. Note down the number of division that coincides with each other. To avoid parallax error, position your eye directly over the division mark.
Release the movable jaw by gently loosening the screw. Slide it enough to hold the sphere or the cylindrical body between the jaws AB without any undue pressure. Align the perfectly perpendicular to the diameter of the body. Gently tighten the screw in order to clamp the instrument in this position to the body.
Note down the position of the zero of vernier’s scale against the zero of the main scale. Normally, it will not perfectly coincide with any of the divisions on the main scale. Record the main scale division to the left of the zero marks of the vernier scale.
Look for the exact coincidence of the vernier scale division with that of the main scale division in the vernier window from the left end to the right. Note down the number N.
Multiply the obtained N by the least count of the instrument and add the product to the main scale reading noted in step 4. Make sure to convert the product into proper units for valid addition.
Repeat steps 3-6 to get the positions of the body at different positions on its curved surface. Make sure to take three sets of reading in each case.
Record the observations in a tabular column with proper reading. If needed, apply zero correction.
Find the arithmetic mean of the corrected readings of the diameter of the body.
Observations
Least count of Vernier Callipers
I main scale division = 1 mm = 0.1 cm
Number of Venier scale divison N = 10
10 Vernier scale divison = 9 main scale divison
1 Vernier scale divison = 0.9 main scale divison
Vernier Constant = 1 main scale division – 1 vernier scale division
= (1 – 0.9) main scale divisions
= 0.1 main scale divisions
Vernier constant = 0.1 mm = 0.01 cm
TrueReading=ObservedReading−(±Zeroerror)
Table for measuring the diameter of a small/spherical body
S. No.
Main Scale reading, M (cm/mm)
Number of coinciding vernier division, N
Vernier scale reading, V = N × VC (cm/mm)
Measured diameter, M + V (cm/mm)
1
2
3
4
Swipe left
ZeroError=±….cm
Mean Observed Diameter = ……cm
Corrected Diameter = Mean Observed Diameter – Zero Error
Result
The diameter of the given sphere/cylinder is _____ cm.
Viva Voce
What is the principle of a vernier?
Answer: The vernier scale uses the alignment of line segments displaced by a small amount to make fine measurements.
How is the least count of vernier callipers calculated?
Answer: Least count also known as the vernier constant is the difference between one main scale division (1 mm) and one vernier scale division (0.9 mm). It can also be calculated by dividing the smallest unit on the main scale by the total numbers on the vernier scale.
Define vernier constant.
Answer: Vernier constant is the ratio of the smallest division of the main scale to the number of divisions of the vernier scale.
What is parallax error and how can it be avoided?
Answer: Parallax is an effect where the direction and position of the object appear to differ when viewed from different lines of sight.
What are the precautions to be taken while using Verniers?
Answer:
Following are the precautions to be taken while using verniers:
If the vernier scale doesn’t slide smoothly over the main scale, apply grease or machine oil.
Keep the eye directly over the division mark to avoid parallax error.
Screw the vernier tightly without undue pressure to avoid damages to the threads of the screw.
What are the uses of vernier callipers?
Answer:
The uses of vernier callipers are follows
It's not an internet answer
please follow me I will give your answer on time it's my promise