How can you separate mixture of common salt and marble powder by using solvent water
Answers
Answer:
Physical Separation of Salt and Sand
Since both salt and sand are solids, you could get a magnifying glass and tweezers and eventually pick out particles of salt and sand.
Another physical separation method is based on the different densities of salt and sand. The density of salt is 2.16 g/cm³ while the density of sand is 2.65 g/cm³. In other words, sand is slightly heavier than salt. If you shake a pan of salt and sand, the sand will eventually rise to the top. A similar method is used to pan for gold, since gold has a higher density than most other substances and sinks in a mixture.
Separating Salt and Sand Using Solubility
One method of separating salt and sand is based on solubility. If a substance is soluble, it means it dissolves in a solvent. Salt (sodium chloride or NaCl) is an ionic compound that is soluble in water. Sand (mostly silicon dioxide) is not.
Pour the salt and sand mixture into a pan.
Add water. You don't need to add a lot of water. Solubility is a property that is affected by temperature, so more salt dissolves in hot water than cold water. It's okay if the salt doesn't dissolve at this point.
Heat the water until the salt dissolves. If you get to where the water is boiling and there is still solid salt, you can add a bit more water.
Remove the pan from heat and allow it to cool until it's safe to handle.
Pour the salt water into a separate container.
Now collect the sand.
Pour the salt water back into the empty pan.
Heat the salt water until the water boils. Continue boiling it until the water is gone and you're left with the salt.
Another way you can separate the salt water and sand is to stir up the sand/salt water and pour it through a coffee filter to capture the sand.
Separating Mixture Components Using Melting Point
Another method to separate components of a mixture is based on melting point. The melting point of salt is 1474°F (801°C), while that of sand is 3110°F (1710°C). Salt becomes molten at a lower temperature than sand. To separate the components, a mixture of salt and sand is heated above 801°C, yet below 1710°C. The molten salt may be poured off, leaving the sand. Usually, this is not the most practical method of separation because both temperatures are very high. While the collected salt would be pure, some liquid salt would contaminate the sand, like trying to separate sand from water by pouring off water.
Notes and Questions
Note, you could have simply let the water evaporate from the pan until you were left with the salt. If you had chosen to evaporate the water, one way you could have sped up the process would have been to pour the salt water into a large, shallow container. The increased surface area would have exchanged the rate at which water vapor could have entered air. The salt did not boil away with the water. This is because the boiling point of salt is much higher than that of water. The difference between boiling points can be used to purify water via distillation. In distillation, the water is boiled, but is then cooled so it will condense from vapor back into water and can be collected. Boiling water separates it from salt and other compounds, like sugar, but it has to be carefully controlled to separate it from chemicals that have lower or similar boiling points.
While this technique can be used to separate salt and water or sugar and water, it would not separate the salt and sugar from a mixture of salt, sugar, and water. Can you think of a way to separate sugar and salt?
Ready for something more challenging? Try purifying salt from rock salt.