How do you make a lattice square?
Answers
Answer:
Step-by-step explanation:
Place a board of hardboard on a worktable or a flat surface. Draw a rectangle with a size of 2 feet by 1½ feet. Now taking a strip of wood one inch in width, place diagonally on the board and cut at a 45-degree angle on both sides. Take a second strip of wood and lay 2 inches away from the first strip. Again cut this at a 45-degree angle. A good tip is now to have a piece of wood of a width of 4 inches and place it on both strips. This will automatically provide you with a template for the width between the two strips. Now that you have the first two strips aligned, use the template mentioned in step 1 and continue placing strip by strip diagonally until you fill in the rectangle. All strips are to be cut at a 45-degree angle. At this stage be careful not to bump the strips as otherwise you will have to restart again. Take another strip and place it across the bottom layer of the slats. At this stage, it is advisable to fasten this strip with a staple at both ends. Now you should see a crisscross. Continue placing the strips alongside until you fill in the rectangle. Use the template to gain the same width from one strip to another.
Having finished doing so, start stapling all strips together. It might happen that when fastening the strips with staples, the latter tend to penetrate through the two strips. At this stage do not panic. Make a border, using four strips around the lattice to maintain this one whole. Turn it upside down and bend the staples with the hammer. Having hammered all the staples, take the screwdriver and using the tip, hammer the staples into the wood. This will give you a smooth surface.
Answer:
don't have time if u want any part of body picture of girl or any part of body explanation I am here for u yes i am a girl
Step-by-step explanation:
and follow me for this