How do you test for chloride limits?
Answers
Answer:
I hope it will be helpful for you
Answer:
Explanation:
LIMITS TEST FOR CHLORIDE
1. AIM To perform the limit test for chloride on a given sample as per Indian pharmacopoeia and report on its standard.
2. Apparatus required:-
- Nessler’s cylinder
- Glass rod-2
- Measuring cylinder
- Pipette
- Dropper
- Rubber stopper
3. Chemicals Required Dilute nitric acid: Dissolve 106 ml of concentrated Nitric acid in 1000 ml of water.
4. 5 % w/v Silver nitrate solution: Dissolve 5 g of silver nitrate in 100 ml of distilled water.
5. Standard sodium chloride solution: 0.05845% Dissolve 0.05845 g of sodium chloride in 100ml of distilled water.
6. Principle -Reaction Standard:
7. Reaction Test :
8. Nitric acid - why • It extracts a common ion effect by furnishing nitrate ions and thereby suppression of dissociation of silver chloride. • Dilute nitric acid is used to dissolve other impurities if present.
9. Common ion effect: It is defined as the suppression of the degree of dissociation of a weak electrolyte containing a common ion.
10. Procedure Standard Test Pipette out 1 ml of standard sodium chloride solution into the Nessler's cylinder marked as standard Dissolve the specified quantity of given sample in distilled water in Nessler's cylinder marked as test Add 10 ml of dilute nitric acid Add 10 ml of dilute nitric acid Dilute it with distilled water to 50 ml Dilute it with distilled water to 50 ml
11. Finally add 1ml of silver nitrate solution Finally add 1ml of silver nitrate solution Immediately stir with a glass rod and allow it to stand for five minutes Immediately stir with a glass rod and allow it to stand for five minutes Observe it under black back ground Observe it under black back ground
12. Precaution: • Distilled water must be used because chloride present in the tap water will interfere the result. • Same glass rod should not be used because it will affect your observation. • Silver nitrate is photosensitive store it in amber colour bottle.
13. Black dots will be produced if silver nitrate is in contact with skin.
14. • Black spots • Silver nitrate gets into the skin, and there the skin reacts with the silver, so it becomes silver oxide particles. It doesn't dissolve in anything but strong acids. it's only in the dead layers on top, not in the lower layers where it would be permanent, like a tattoo. Once the stain becomes fully developed, it is usually impossible to remove, but it will wear off naturally.
15. • Sample I [ Pass Sample ] : • Observation: • The opalescence produced in the test solution is lesser than standard solution. • Inference: • The given substance passes the limit test for chloride as per Indian pharmacopoeia when compared with that of a standard substance.
16. • Sample II [ Fail Sample ] : • Observation: • The opalescence produced in the test solution is more than standard solution. • Inference: • The given substance fails the limit test for chloride as per Indian pharmacopoeia when compared with that of a standard substance.
17. Opalescence : It is a type of dichroism seen in highly dispersed systems with little opacity