How does the wheel of turbine starts moving in hydroelectric plant. Explain
Answers
Answer:
An opening in the dam uses gravity to drop water down a pipe called a penstock. The moving water causes the turbine to spin, which causes magnets inside a generator to rotate and create electricity.
Answer:
An opening in the dam uses gravity to drop water down a pipe called a penstock. The moving water causes the turbine to spin, which causes magnets inside a generator to rotate and create electricity.
Explanation:
So just how do we get electricity from water? Actually, hydroelectric and coal-fired power plants produce electricity in a similar way. In both cases a power source is used to turn a propeller-like piece called a turbine, which then turns a metal shaft in an electric generator, which is the motor that produces electricity. A coal-fired power plant uses steam to turn the turbine blades; whereas a hydroelectric plant uses falling water to turn the turbine. The results are the same.
Take a look at this diagram (courtesy of the Tennessee Valley Authority) of a hydroelectric power plant to see the details:
The theory is to build a dam on a large river that has a large drop in elevation (there are not many hydroelectric plants in Kansas or Florida). The dam stores lots of water behind it in the reservoir. Near the bottom of the dam wall there is the water intake. Gravity causes it to fall throug
h the penstock inside the dam. At the end of the penstock there is a turbine propellor, which is turned by the moving water. The shaft from the turbine goes up into the generator, which produces the power. Power lines are connected to the generator that carry electricity to your home and mine. The water continues past the propellor through the tailrace into the river past the dam. By the way, it is not a good idea to be playing in the water right below a dam when water is released!