how is a pinhole camera made ?
Answers
ᴀɴsᴡᴇʀ :-
The pinhole may be punched or drilled using a sewing needle or small diameter bit through a piece of tinfoil or thin aluminium or brass sheet. This piece is then taped to the inside of the light-tight box behind a hole cut through the box. A cylindrical oatmeal container may be made into a pinhole camera.
Answer:
The pinhole may be punched or drilled using a sewing needle or small diameter bit through a piece of tinfoil or thin aluminium or brass sheet. This piece is then taped to the inside of the light-tight box behind a hole cut through the box. A cylindrical oatmeal container may be made into a pinhole camera.
Explanation:
*Materials. 2 pieces of white card stock. ...
*Cut a square hole. Cut a square hole into the middle of one of your pieces of card stock.
*Tape foil over the hole. Tape a piece of aluminum foil over the hole.
*Poke a hole in the foil. Use your pin or paper clip to poke a small hole in the aluminum foil.
*Try it out. ...
*Get creative.
hope it helps
bye