How is convert ethanol into ethylmethyl ketone.
Answers
Methyl ethyl ketone is readily separated from ethanol by extractive distillation. Effective agents are methyl benzoate, phenol, glycerol and nitroethane. Methyl ethyl ketone cannot be separated from ethanol by distillation or rectification because of the closeness of their boiling points.
Extractive distillation is the method of separating close boiling compounds from each other by carrying out the distillation in a multiplate rectification column in the presence of an added liquid or liquid mixture, said liquid(s) having a boiling point higher than the compounds being separated. The extractive agent is introduced near the top of the column and flows downward until it reaches the stillpot or reboiler. Its presence on each plate of the rectification column alters the relative volatility of the close boiling compounds in a direction to make the separation on each plate greater and thus require either fewer plates to effect the same separation or make possible a greater degree of separation with the same number of plates. The extractive agent should boil higher than any of the close boiling liquids being separated and not form minimum azeotropes with them. Usually the extractive agent is introduced a few plates from the top of the column to insure that none of the extractive agent is carried over with the lowest boiling component. This usually requires that the extractive agent boil about twenty Celcius degrees or more higher than the highest boiling component. At the bottom of a continuous column, the less volatile components of the close boiling mixtures and the extractive agent are continuously removed from the column. The usual methods of separation of these two components are the use of another rectification column, cooling and base separation, or solvent extraction.