how lacing is placed??
Answers
Answer: 1
Put a shoe in front of you with the toe facing away from you. Starting from the two frontmost opposite facing holes, insert each end of the shoelace from the inside. Make sure both sides of the remaining laces are equal.[1]
2
Working in a diagonal direction, insert the right end of the shoelace into the next left hole (from the top). Alternate method: You can insert the lace pointing from the front of the shoe inward (instead of going from the inside pointing outward), to give a more neat appearance.
3
Insert the left end of the shoelace into the next right hole.
4
Continue working your way down until you reach the ends.
5
Make a bow
Method Two of Six:
Straight-Lace Method
1
Place one end of the shoelace through the top right hole (the toe end) and the other end through the left hole on the bottom (near the beginning of the shoe). The left hole should have a short length of lace left; only enough to tie the lace at the end.[2]
2
Using the right end, insert it in the opposite hole in a straight line.
3
Bring it out from the bottom, and insert it (from the bottom again) through the next hole.
4
Continue moving it horizontally across the holes until you reach the last hole.
5
Tie your two remaining ends in a bow (see below).
Method Three of Six:
Heel-locking Method
If you find that your heels are slipping in your shoes, this method can help alleviate your problem.
1
Lace your shoes using the criss-cross method, stopping before the last hole.[3]
2
Take the lace on one side, and put it into the hole on the same side. Do the same for the other lace.
3
Insert the left lace through the loop you have now created on the right.
4
Repeat for the other lace.
5
Tie your shoes as you would normally, and enjoy your slip-free heels!
Explanation: