How to construct a 60 degree angle with a protractor?
Answers
Answered by
0
step 1 draw a line
step2:place the protractor on the end of the line from any side
make sure that the line which is present on the downward side of protactor must be placed on the drawn line
step3:when you will place it in this manner then you will that a ray to 60 degree from the centre will go the there will be two 60 degrees the 60 degree which is present on the left side on that point you have to mark that point and then remove the protractor from the line and join the point to that point which is at the end of left of the line
step2:place the protractor on the end of the line from any side
make sure that the line which is present on the downward side of protactor must be placed on the drawn line
step3:when you will place it in this manner then you will that a ray to 60 degree from the centre will go the there will be two 60 degrees the 60 degree which is present on the left side on that point you have to mark that point and then remove the protractor from the line and join the point to that point which is at the end of left of the line
Answered by
0
1) Draw a line.
2) Take a point on that line.
3) Keep the protactor's centre point on that point that was drawn on the line.
3)Then take 60 degree from either left or right(as per your convenience)
4) Then make a point on 60 degree according to the protactor.
5) Join the point that was drawn on the line to the point that was taken by protactor at 60 degree.
2) Take a point on that line.
3) Keep the protactor's centre point on that point that was drawn on the line.
3)Then take 60 degree from either left or right(as per your convenience)
4) Then make a point on 60 degree according to the protactor.
5) Join the point that was drawn on the line to the point that was taken by protactor at 60 degree.
Similar questions