How to do a bus and star topology?
Answers
Answer:
Bus
Bus topology uses one main cable to which all nodes are directly connected. The main cable acts as a backbone for the network. One of the computers in the network typically acts as the computer server. The first advantage of bus topology is that it is easy to connect a computer or peripheral device. The second advantage is that the cable requirements are relatively small, resulting in lower cost.
One of the disadvantages is that if the main cable breaks, the entire network goes down. This type of network is also difficult to troubleshoot. For these reasons, this type of topology is not used for large networks, such as those covering an entire building..
Star
In star topology, each computer is connected to a central hub using a point-to-point connection. The central hub can be a computer server that manages the network, or it can be a much simpler device that only makes the connections between computers over the network possible.
Star topology is very popular because the startup costs are low. It is also easy to add new nodes to the network. The network is robust in the sense that if one connection between a computer and the hub fails, the other connections remain intact. If the central hub fails, however, the entire network goes down. It also requires more cable than bus topology and is, therefore, more expensive
Explanation:
hope it will help u
mark as brainliest
plz follow me
Explanation:
bus topology is made up of a main single cable with the terminators at both ends its is the shared communication medium that makes the backbone of the system.
star topology is the most common topology used. here all the workstation are connected to a cental connection point called a hub