how to find the measurement using vernier caliper??
please dont spam
Answers
Explanation:
A quick guide on how to read a vernier caliper. A vernier caliper outputs measurement readings in centimetres (cm) and it is precise up to 2 decimal places (E.g. 1.23 cm).
Note: The measurement-reading technique described in this post will be similar for vernier calipers which output measurement readings in inches.
Measurement Reading Technique For Vernier Caliper
In order to read the measurement readings from vernier caliper properly, you need to remember two things before we start. For example, if a vernier caliper output a measurement reading of 2.13 cm, this means that:
The main scale contributes the main number(s) and one decimal place to the reading (E.g. 2.1 cm, whereby 2 is the main number and 0.1 is the one decimal place number)
The vernier scale contributes the second decimal place to the reading (E.g. 0.03 cm)
caliper 1
Let’s examine the image of the vernier caliper readings above. We will just use a two steps method to get the measurement reading from this:
To obtain the main scale reading: Look at the image above, 2.1 cm is to the immediate left of the zero on the vernier scale. Hence, the main scale reading is 2.1 cm
To obtain the vernier scale reading: Look at the image above and look closely for an alignment of the scale lines of the main scale and vernier scale. In the image above, the aligned line correspond to 3. Hence, the vernier scale reading is 0.03 cm.
In order to obtain the final measurement reading, we will add the main scale reading and vernier scale reading together. This will give 2.1 cm + 0.03 cm = 2.13 cm.
Let’s go through another example to ensure that you understand the above steps:
caliper 2
Main scale reading: 10.0 cm (Immediate left of zero)
Vernier scale reading: 0.02 cm (Alignment of scale lines)
Measurement reading: 10.02 cm
Compensating For Zero Error
Now, we shall try with zero error. If you are not familiar on how to handle zero error for vernier calipers, I suggest that you read up on Measurement of Length.
caliper 3
The reading on the top is the measurement obtained and the reading at the bottom is the zero error. Find the actual measurement. (Meaning: get rid of the zero error in the measurement or take into account the zero error)
Measurement with zero error: 3.34 cm
Zero error: – 0.04 cm (negative because the vernier scale is to the left)
Measurement without zero error: 3.34–(–0.04)=3.38 cm
If you do not understand the subtraction of the negative zero error from the measurement, please read on. Since the zero error is -0.04 cm, this means that all measurements taken by the vernier calipers will be SMALLER by 0.04 cm. Hence, you will have to ADD 0.04 cm to ALL measurements in order to get the TRUE measurement. The subtraction is done in the above case is to have an elegant way of obtaining a resultant addition: 3.34+0.04=3.38 and to make it COMPATIBLE with positive zero error. This means that once you have determined the nature of the zero error (positive or negative), you can just subtract the zero error and be sure that your final answer is correct.
Consider a zero error of +0.04 cm. With my method, 3.34–(+0.04)=3.30 cm.
Normal method: Since the zero error is +0.04 cm, this means that all measurements taken by the vernier calipers will be larger by 0.04 cm. Hence, you will have to SUBTRACT 0.04 cm from ALL measurements in order to get the true measurement. The final calculation will be 3.34–0.04=3.30 cm, which is the same as my method.
Note: I hope that I did not confuse you. Drop a comment below if you encounter any difficulties.
More Vernier Caliper Practice:
Without Zero Error
Finding The Zero Error
With Zero Error
With Other Measurement Topics
Self-Test Questions For Vernier Calipers
Where on the vernier calipers would you read to obtain the main scale reading?
Where on the vernier calipers would you read to obtain the vernier scale reading?
What is the smallest possible reading (in cm) of a vernier caliper?
If you still do not understand the concept, please click the navigational buttons below to go to the next page. There is a very useful simulation of the vernier calipers.
1 2Next page
Next: How To Read A Micrometer Screw Gauge Previous: Measurement of Time
Referred to the attachment
