Physics, asked by rajkanchan341, 1 year ago

How to make a hologram computer

Answers

Answered by Rockysingh07
3

Holograms are made by using a single laser beam. The beam is then split into two beams by a special lens. That way, you get two laser beams that are exactly the same. One of those beams is the "reference beam" and is shone directly onto the film.

To Create a hologram

  • Set up a projector from above so it faces the floor.
  • Place a mirror on a 45 degree angle beneath the projector.
  • Place a glass screen or other reflective transparent surface a few feet away from the mirror.
  • The projection image to be used should be set against a dark background.

I hope it will helps you to guide and and mark me brainliest

It's Rocky Singh

Answered by sirichandana9265
0

Answer:

Holography Supplies

The following items are included in our Standard and Student hologram kits, but can also be purchase separately from our online catalog.

PFG-03M professional holographic plates

JD-4 Holography Processing Kit

Integraf Holography Diode Laser (or your own laser)

FormaFlo 600 wetting agent (30ml)

If preferred, for basic holography, the PFG-03M and JD-4 combination may generally be substituted with the PFG-01 and JD-2 (or JD-3) combination.

Requirements and Other Materials

The following can be found in most schools and homes, or purchased economically at your local general store.

Requirements

A stable table (to serve as your work area)

A bright hard object, preferably sturdy metal, i.e. coins (to be the subject of your hologram)

One flat hardcover book 6"x8" (150x200mm) or larger (to serve as a shutter).

A vase or any solid object about 1 foot (30cm) high (to serve as a tower upon which to place the laser).

Six 1-liter bottles (1.5 gallons) of distilled water (to prepare the processing chemicals)

Three small trays with flat bottoms 3"x3" or larger (to serve as developer trays)

Three large trays (or bowls) with flat bottoms 4"x5" or preferably larger (to serve as rinse trays)

One rubber kitchen glove or tongs (to handle the holographic plate while developing

Similar questions